Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

LLC Tool Rest support

Posts

LLC Tool Rest support

#1

LLC Tool Rest support

Philip Duffy

Last week my SS tool rest from LLC Tool seperated at the top bar. I sent a quick email to the company asking how to best repair the attachment of the round bar to the base unit. An immediate response told me that the company was sending me a new rest, made by a new process. It arrived a few days later and is even More Awsome than the original!! -- -that is above and beyond for service to the customer and I thank them heartedly. Just think companies like LLC Tools should be acknowledged as the best there is in a great country. American made, American smiles all around! Philip

Re: LLC Tool Rest support

#2

Re: LLC Tool Rest support

George Guadiane

I'm pleased but not surprised that you had such a good response.

Glad to buy American myself, whenever possible.

Especially in difficult economic times, customers (people with money) are more difficult to find and keep than the merchandise that often piles up on shelves.

I have not dealt with this company, but your experience is a GREAT advertisement for them.

I sell antiques on eBay. Even GOOD customers sometimes have problems with things I sell and SOMETIMES, we even get it wrong. We take several steps to let customers know that the deal isn't done till they are HAPPY with their transaction. I encourage anyone who has a problem with their purchase, even if you think it might be "your fault" to contact the vendor/manufacturer and give them a chance to show you how important you are to them.

Re: LLC Tool Rest support

#3

Steve Kubien

Web site?

Steve Kubien

Always nice to hear a good customer service story but I have a question... Who is LLC Tool? I (very) quick trip to google yielded nothing for me. Have you got a web address?

Thanks

Re: LLC Tool Rest support

#4

My apology to all concerned

Philip Duffy

Eating crow is never easy but swallowed quickly, it passes. I mis-stated the name of the Advanced Lathe Tools, LLC when I posted my initial praise for the company that sent a replacement tool rest. I apologise to all, offended or not. The Company of Advanced Lathe Tools , LLC deserves better than my shoddy posting. I hope the company will suffer no consequences as they were absolutely great in the response to my inquiry. Philip

Re: LLC Tool Rest support

#5

Still no joy on link

Dave Peebles Lyons, Ohio

Hey Philip,

Still can't find a link to the site you spoke of. Google seemed to be of no help.

I am all about giving props to the good guys, but you need to fill in the link box so we can all share the good flow about a good vendor.

Best wishes,

Dave

Re: LLC Tool Rest support

#6

Re: Still no joy on link

Philip Duffy

The only link I know of is the following email address:

ssinner@mchsi.com

Hopefully, Steve will post his web. Phil

Re: LLC Tool Rest support

#7

Re: My apology to all concerned

john lucas

Well it sure is hard to find. I've tried searches for Advanced Lathe tools, had fun looking at some cool metal lathes and tooling but no tool rests. I went through the last 2 issues of American Woodturner and Woodturning Design and no adds were found. I did searches for Steve Sinner and found a lot of info but no web site. Hope he jumps in I'd like to see what he offers. Lord knows I need more tools.

Re: LLC Tool Rest support

#8

Re: My apology to all concerned

Carol Reed, Strawberry, AZ

FWIW, John, I know Steve Sinner. He is a member if the Quad Cities Wood Turning Club. I was a member there while I was in seminary. Steve has a Robust lathe. The tool rest sounds like a Robust tool rest. Look Steve up in the AAW membership list and send him an email. I think he can clear things up for you.

If it is a Robust tool rest, Brent at Robust will be happy to help you. I have a couple of his tool rests and they are the best.

Re: LLC Tool Rest support

#9

Re: My apology to all concerned

Joe Meirhaeghe

Yes Steve sinner & a partner own Advanced Lathe tools.

I am a personal friend of Steve & his partner. I can tell you as of right now they do not have a web site, but is talking about putting one up.

They have been making Tool Rest with a hardend top long before the Robust Co.

They also make boring bar systems & are starting to build Steady rest too.

You can email Steve at: ssinner@mchsi.com and he'll get back to you.

Re: LLC Tool Rest support

#10

I've got an older one

bob elliott

I believe it was the Portland or maybe the Richmond AAW Symposium that I ran across Advanced Lathe Tools, LLC in the vendor area. Their booth was situated in, of all places, a corner of the Robust Lathe booth. The two Advanced men made it clear they were not a part of Robust and neither of them were Steve Sinner. The toolrest I bought is about 2" long, made of steel, not stainless. It's great for getting in close when access becomes an issue.


Re: LLC Tool Rest support

#11

side view

bob elliott


Re: LLC Tool Rest support

#12

Re: Still no joy on link

Dave Peebles Lyons, Ohio

Thanks Philip,

I do know Steve, I have one of his pieces in my collection.

He is a fine woodturner and an excellent tool maker.

But you need to get him going on the website. :) I would benefit all of us woodturners looking to spend our money.

Dave

Re: LLC Tool Rest support

#13

Re: I've got an older one

Joe Meirhaeghe

Bob

It was probably at Richmond where you got it. So how do you like it anyway ?

I know that Steve Sinner & Sarge ( his partner in Advanced Lathe Tools )were set up in the Robust booth there. They are NOT Part of the Robust Co. Steve was Demoing there for Brent on a Robust Lathe thst year. Brent let them set up in his booth there.

Steve may have not been in the booth at the time you were there but he is one of the Owners of Advanced Lathe tools & all the tool rest they make are made in his Studio.

Re: LLC Tool Rest support

#14

Re: LLC Tool Rest support

Brent English

Just some extra info here from Brent at Robust Tools. Steve Sinner and his business partner Jerry Sergeant have indeed been making toolrests with a hardened rod longer than Robust Tools. In fact, it was with Steve�s encouragement that we decided to offer our version to the market. Like Joe, I call Steve a friend. We�ve both been to each others' homes numerous times and Steve continues to be a great source of input for the design of all of our tools. Steve turns on a Robust lathe, and he is pictured on our website with the one we made for him. He has also been a featured booth demonstrator for us numerous times at the AAW symposium, and in exchange, he has displayed and sold his toolrests from our space, just a short distance from ours. The good service Phil noted from Advanced Lathe Tools LLC will come as no surprise to those that know Steve and Jerry.

Re: LLC Tool Rest support

#15

Re: LLC Tool Rest support & Robust

Joe Meirhaeghe

Brent

Thanks for your post. I know Steve seldom vists any internet fourms but will appriecate your comments. I'll tell him about it.

I'd also like to comment on the Robust Lathe Steve has. I work with Steve in his studio one or two days a week & have logged probably well over 500 plus hrs on his Robust Lathe over the last 3 yrs. We've turned many 300 to 450 lb logs,& every time I'm amazed at how smooth it handles them. I have to say it's one sweet lathe. I'd have one in a heart beat if I could afford it.

Great Lathe Brent

Re: LLC Tool Rest support

#16

Re: I've got an older one

bob elliott

Hi Joe,

It's a great little toolrest. When I was in Albuquerque, I looked in the Robust booth for the Advance guys with the intention of getting a longer rest but I guess Steve chose not to be a vendor that year.