I want to turn some platters simular to what Doug Fisher turns. They were also on the cover of a past Woodturning Design mag. Does anyone know where I can get a handout with instructions on turning something simular? All he has is pictures on his website.
Try as you might I don't think you or anyone else could come close to duplicating Doug's work. I sat through both of his sessions at Hartford which IMHO were the best of the symposium and even with copious notes would have hard time even trying.
I agree with Mike. Doug's demos were some of the best I have ever seen. His skills at the lathe are something to see. He normally turns outboard with rather large wood. Hartford were the first demos he had ever done so most of his techniques are not commonly available yet. He has no big secrets. His turnings are very high on my list of favorites. There is a brief write-up in the Handout Book from the 2010 AAW symposium that may give you a few insights if you can get your hands on one. I think the turning is the easy part-the carving and coloring are much more involved.
By the way, he is one of the nicest people I have ever met-humble, funny, bright and tremendously skilled.
No offense, but if you have the equipment, let your imagination be your guide. Maybe develop your style through experimentation, using his pictures as a rough idea. Just be prepared for a lot of mulch!
Bob - I was perhaps a bit harsh in my statement. I did make some notes for future use about the way Doug mounts his large pieces to achieve the offset. I am pretty busy with pre Christmas stuff right now, but will have a look at my notes and drop you an email if it looks useful.