Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Rose Pedal Pen Blanks

Posts

Rose Pedal Pen Blanks

#1

Rose Pedal Pen Blanks

Dave Gelnett

A month back or so I asked some questions about putting rose pedals in some polyester resign to make pen blanks. Below is an out of focus picture (sorry) of the results. The far right black pen was the first where I painted the tubes black. The resign is clear so the black appearance of the pen is from the tube being black.

Well my wife came along and like the pen but wanted a different color for a women lunch that she was sponsoring a table. The table �theme� was turquoise. I kind of thought black is good but soon saw the error of my ways. So �we� tried painting the tubes turquoise and this is the results. Something I would have never expected the appearance to change so drastically.

Had a few of the tubes get scratched slightly when insetting the tubes into the blanks which gave the appearance of faint gold streaks below the pedals.

The only difficulty I had was the rose pedals were the week point of the pen blank so when turning, the blanks would split apart through the rose pedal. I had to keep adding thin CA glue to the edge so it would soak through the blank to hold the rose pedals together. It was kind of like using a faceplate with a waste wood blocked glued on with paper. You separate the two blocks of wood at the paper junction. Not sure if there is a fix to this problem but your thought would be great.


Re: Rose Pedal Pen Blanks

#2

Bob Moffett

Re: Rose Pedal Pen Blanks

Bob Moffett

those are really nice! I'm sure the ladies will love them.

Re: Rose Pedal Pen Blanks

#3

Re: Rose Pedal Pen Blanks

Scott Greaves in Blackfoot ID

These are very cool Dave! Nice work! I think they turned out great!

So, did you cast a solid blank with the rose petals in the blank, then drill and glue a painted tube into it, then turn? If so, I can see why the blank wanted to come apart. Have you tried painting the tubes, then gluing the petals onto the tube, then casting the whole thing in PR? It would likely give you a completely different look, but it might solve the problem of the blank splitting apart. If I were you I'd just be happy they turned out as nice as they did!

Scott.

Re: Rose Pedal Pen Blanks

#4

Re: Rose Pedal Pen Blanks

Dave Gelnett

Thanks Scott, you are correct about the solid block. When I have more time I will try what you said but need to build the form and find a way to plug the ends and suspend the tube in the middle.

I will probably have to hide them so it does not give my wife any more ideas as to who to give them too.