Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

mission accomplished

Posts

mission accomplished

#1

mission accomplished

Carol Reed, Strawberry, AZ

The mission today was to make a mess in the turning shack.

I did that.

I also renewed some tool skills. I also learned that cutting in reverse unwinds the chuck. Who knew?!? :)

Tomorrow, clean up the mess, sharpen the tools, and make a tool rack. Good thing the floor is wood!

Maybe by week's end I'll have something to show for it all.

Re: mission accomplished

#2

Re: mission accomplished

Carole Valentine

Hopefully you have now discovered that maybe there is a place for a set screw to lock your chuck to the spindle when you turn in reverse? :D Just remember to take it out before trying to unscrew your chuck...DAMHIKT.

Re: mission accomplished

#3

Re: mission accomplished

john lucas

Carol Put the chuck on and then give it an extra push with the chuck key. If you aren't using one of the plastic bushings between the chuck and spindle it will usually let you turn in reverse. Not if you get a catch but for general turning. I don't do it on larger work but turn in reverse on my hand mirrors all the time.

Re: mission accomplished

#4

Re: mission accomplished

Carol Reed, Strawberry, AZ

Nope, no set screw. Needed a wrench to make the adapter connection tighter. Live and learn.

Actually it hung in there longer than I thought. It's just that my tool wasn't cutting. Sharp enough to nick me but not cutting wood. Hmmmm.... Then slight wobble. Light dawns. I laugh. Shows one can learn the darnedest things!