Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Okay! Go ahead and laugh ...

Posts

Okay! Go ahead and laugh ...

#1

Okay!  Go ahead and laugh ...

Ed Moore in SW VA

at me. LOML and I went to the Blue Ridge Woodturners Christmas party Friday evening and had a delicious dinner at the home of Willie Simmons. Willie and his lovely wife have a beautiful new home with a basement that easily could handle 60 or 70 people for a turning demo - an idea that doesn't appeal to them at all.

As is the custom, we had a Chinese auction with lots of nice contributions. We won far more things than we should have won even though we bought lots of tickets. A nice cherry salad bowl by Richard Cruise, a Corian pen and mirror by Peter Toch, a beautiful handmade doll, and a Serious handle and 3/4" tool were part of our embarrassment of riches.

Saturday morning I took the Serious tool, which had barely been used by the elderly gentleman who donated it, up to the shop to be sharpened and tested. After removing the tool from the handle I learned that the lead shot in the handle was NOT secured once the tool was removed. I guess that about 20% of the shot spilled out onto the shop floor - fortunately not in the area where I had been making ornaments. I spent 20 - 30 minutes on my knees sweeping up the small shot that had spread everywhere. A few pieces got away, but I eventually got it into my large aluminum dust pan where the dust could be blown away as you roll the shot to different parts of the pan. The shot is back in the handle and the tool is nicely sharpened. And I am a little wiser! :D :D

A quick test on a piece of waste wood convinced me that I will enjoy using that tool! And I thank Charlie for donating it. Every guy there had put tickets in the can to be drawn for it, and I feel very fortunate to have won it.

Ed

Re: Okay! Go ahead and laugh ...

#2

Re: Okay!  Go ahead and laugh ...

Dick Wilson

Hmmmm. Ed, You could spread shot in the area you stand when you turn, then you could floooow around as you are making those perfect curves. Nah.

Re: Okay! Go ahead and laugh ...

#3

Steven Antonucci

Same story for me, except it was...

steven antonucci

an open can of Polycril and another open can of red aniline dye, and it took place in the front seat of my truck yesterday. I am looking for hitch hikers to help me clean up the mess...

Sounds like you got the better deal.

Steve

Re: Okay! Go ahead and laugh ...

#4

Re: Same story for me, except it was...

Ed Moore in SW VA

Steve, you win! You had much worse luck than I did. And, since the tool was won in a raffle and is worth $185 brand new, I made out big time. I refused to let those little pieces of shot get away. I measured and they were 3/32 of an inch dead on. They seemed more like 1/16 of an inch.

Be careful how you cruise around looking for hitchhikers! :D :D

Ed

Re: Okay! Go ahead and laugh ...

#5

Steven Antonucci

I didn't try to reclaim the Polycril...

steven antonucci

Well I sort of tried, but now there's a bunch of stiff paper towels in the shop at PV. Nothing like pushing down on the seat to have a pool of uncured finish come up. With red dye in it.

If you were picking up bird shot at 3/32", I'd say we tied. You win the tie breaker though with the gouge.

S

Re: Okay! Go ahead and laugh ...

#6

Mike Stafford

Does Carolyn know...

Mike Stafford

...about you crawling around on your hands and knees looking for lead BB's? (Drinking in the shop is not recommended Ed.)

...that you know how to use a dustpan? (Folks, this guy had his turning club over to clean up his shop. That is probably why he knew where the dustpan was.)

...that your shop is perilously close to collapse from the sheer weight of the tools it contains? (The first time I visited ED, he, Richard Raffan and I were almost killed by a tool avalanche when Ed carelessly removed a gouge from his tool storage rack causing a cataclysmic imbalance spilling some of the 4000 pounds of turning tools he has stored in plywood boxes in an A-frame rack. My recent visit confirms that Crafts Supplies, Packard and Thompson Tools store all their excess with Ed.)

...that you need another bowl gouge like you need another hole in your head? I know you have recently lost all your hair but but......

Ed, it couldn't happen to a better guy. I am just sorry I was not there to witness the whole thing. :b

Re: Okay! Go ahead and laugh ...

#7

Mike, this is the first ...

Ed Moore in SW VA

3/4" bowl gouge that I have gotten. Actually, the shaft is 3/4" and the tool is 13/16" OD. The largest I had previously was 5/8". Because we did so well in the Chinese auction I am considering making a generous contribution to the Blue Ridge Club. I think that my friend Don Riggs bought more tickets than we did and he did not win a thing. I actually also won a $15 gift certificate and I rejected it and told them to draw another ticket, which they did without comment.

I did lose my hair to chemotherapy, but now it is starting to return and I look like a white Chia Pet. We had a Nick Cook workshop in my shop not long after I completed the chemo and I didn't have the energy to clean the shop or do anything else. My buddies in the Smith Mountain Lake club came over and really did a super job in getting the shop ready for the workshop. And after the workshop they cleaned it again. And I am optimistic that some day I will find those things that they put away. :D :D I really appreciated Mike Stafford coming up for the demo and workshop.

Ed

Re: Okay! Go ahead and laugh ...

#8

Mike Stafford

Ed, I am glad you now have....

Mike Stafford

a 3/4" gouge. I was beginning to worry that you were gouge deprived. ;)

Congratulations on both winning the gouge and giving me the gray chia pet image. You probably shouldn't have done that...... :b

P.S. You should get Don a new gouge to replace that one he has ground with the Michelsen grind which only has 1/4" of flute left. I will go halfsies with you if you decide to do so.... :D

Re: Okay! Go ahead and laugh ...

#9

Did you get that gouge for ornament finials 

John Lucas

Re: Okay! Go ahead and laugh ...

#10

I got it for turning the perches ...

Ed Moore in SW VA

on birdhouse earrings!

Re: Okay! Go ahead and laugh ...

#11

Steve Kubien

Re: Okay!  Go ahead and laugh ...

Steve Kubien

I had no experience with lead shot until I got a 25lb bag from a gunsmith near me. I'm not a shooter so I never saw the stuff before. When I picked it up, then gentleman's wife advised me not to drop the bag. She had learned the hard way that her home vaccum would not pick up lead shot and of course, it's not magnetic. She had a bag explode on her carpet. I do not believe her husband was allowed to bring it inside ever again.

Thanks for the giggle