Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

From Plaque to Platter...

Posts

From Plaque to Platter...

#1

From Plaque to Platter...

GaryG in MD

This one is not as pretty as Ray's, but it has humble origins in an old discarded piece of work memorabilia donated by a friend. I used Tom Boley's double-stick tape method. Worked like a gem -- but only use two (!) strips of tape. There are more where this came from. Guess who's going to get it for Christmas. ...Gary


Re: From Plaque to Platter...

#2

Great way to recycle.

Ray - Middletown, IN

I was going to put a similar bead on mine, but chickened out. Nicely done.

Ray

Re: From Plaque to Platter...

#3

Re: From Plaque to Platter...

Jennifer Indy.USA

Gary it's hard to believe that's the same piece of wood. Nice job!

Re: From Plaque to Platter...

#4

Re: From Plaque to Platter...

GaryG in MD

Thanks. Yes, I could hardly believe it myself. It's the same old woodturning story -- you never know what's inside until you look. I didn't realize that it's laminated until I turned it. One of the laminations started opening up a tiny bit, but a little CA took care of that. The different grain patterns in the boards actually add a lot of unexpected interest. I can't wait to try another one. ...Gary

Re: From Plaque to Platter...

#5

Re: Great way to recycle.

GaryG in MD

Thanks Ray. For the deep ring, I used a small point tool I got from Paul Fennell. Makes a very nice clean cut if you do it gently. ...Gary