Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Anyone Played With Encaustic *LINK*

Posts

Anyone Played With Encaustic *LINK*

#1

Anyone Played With Encaustic *LINK*

charlie belden

I don't recall how I stumbled on "encaustic", but it looks like an interesting medium with possible applications to turnings. Basically you have pigments in wax rather than a solvent. Heated to 212 F, it becomes a viscous fluid which can be mixed like oils and applied with a brush, spatula or just poured. Reheated, it can be reworked. It also permits doing "glazes".

Anyone have any experience with encaustic used on a turning?


Dick Blick YouTube Vid on Encaustic

Re: Anyone Played With Encaustic *LINK*

#2

Re: Anyone Played With Encaustic  *LINK*

Ron Sardo


Pysanky

Re: Anyone Played With Encaustic *LINK*

#3

Re: Anyone Played With Encaustic

charlie belden

With the egg dying you linked to, the wax is used to mask off an area, a resist. That same idea is used in batik for the same reason. I've used it with electro forming to mask off areas I didn't want to plate on.

Encaustic uses waz, not as a way of protecting an area from color, but as the medium for ADDING color to a surface. It seems as though, when used as a glaze, the underlying wood grain would show through.

Re: Anyone Played With Encaustic *LINK*

#4

Re: Anyone Played With Encaustic

Galen Vetterick

It seems like it would be too soft for a permanent finish color on wood. I could see filling open pores in a wood turning. Would give you more colors than the white and black waxes I have seen used already.

For beeswax it seemed to stay fluid long enough to pick it up with a brush and lay some down. Her examples do not look like you could be very detailed in application though.

Gee my kids melted their broken crayons on an electric heated serving tray and did the same type of art. Looks like this has developed into a "Big Kids" art medium.

Re: Anyone Played With Encaustic *LINK*

#5

Steven Antonucci

I taught at Peters Valley 2x in 2010

steven antonucci

The first time, they were teaching encaustic in the studio next to mine. The second time, they were doing Pysanksy. Both are extremely interesting, and there should be a way to leverage something for woodturners, but I haven't figured it out yet.

Steve

Re: Anyone Played With Encaustic *LINK*

#6

Re: Anyone Played With Encaustic *LINK*

Juergen

Charlie, this look like the "Solid Ink" Tektronix/Xerox used in their "Phaser" color printers for about 15 years. As I remember the color was vivid and sharp. It's probably cheaper at Blick's


Xerox Solid Ink Printers