Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Looking for Sandpaper Storage

Posts

Looking for Sandpaper Storage

#1

Looking for Sandpaper Storage

Keith Inscho

In trying to put together my new turning "studio" (used very loosely) , I am trying to come up with a way to store my sandpaper/disks/holders and stuff where it could be kept neat and tidy and close to the lathe. Would anyone care to share pictures of your clever solutions? In need of ideas. Thanks!

Re: Looking for Sandpaper Storage

#2

JL

Flea market.

JL

Look for the old floppy disk boxes. The 3 1/2" disk boxes work well for the small sanding disks. The 5 1/4" disk boxes work well for 5" ROS sanding disks.

I use a plastic file box with file folders for all the 8 1/2 x 11" sheets of sand paper.

Re: Looking for Sandpaper Storage

#3

here's mine... *LINK*

GaryG in MD

Keith,

Please go to

http://montgomerycountywoodturners.org/Documents/Tip31%20-%20Sanding%20Disc%20Drawers.pdf

and you'll see my story. It works very well for me. I can use it in a fixed location or take it with me wherever I go. (If I move it in the car, I tape the drawers shut -- if they come out and spill their contents of unlabeled discs, it's not a nice thing.)

...Gary


http://montgomerycountywoodturners.org/Documents/Tip31%20-%20Sanding%20Disc%20Drawers.pdf

Re: Looking for Sandpaper Storage

#4

Mike Mills

Re: Looking for Sandpaper Storage 

Mike Mills

I need to reorganize mine also but these may give you some ideas. For flat paper sheets I use an old letter tray with � plywood to hold the sheets flat. For rolls for the random orbit sander I use t.p. roll holders mounted in a box. The long narrow rolls I just have on separate hooks. Sometime I will make a holder like paper towels that will hold all of them more conveniently. One bar about 15 inches long will hold all six grits. This and the 2 inch disc are what I use at the lathe 99% of the time.

For the 2� sanding disc, any crafty store sells the small containers that screw together (maybe in the bead dept). They usually come in a pack of four for about $3. The number of disc stored per section depends on the various grits,