Bowl that almost beat me. (Long)
Don Orr
You all know I don't post much, but I wanted to show this bowl in spite of how much I despise it. John Jordan is a very wise man when he says �Life is too short to turn crappy wood�. I can't agree more after working on this bowl. The backstory (there is always a backstory with me) is that a local guy did some excavation for an addition we did a few years ago (one of my wife's former 5th grade students). We got talking about wood and I gave him my standard �if you ever come across any burls, let me know� line. Several months later I get home from work to find this VERY large turtle shaped thing in my yard with his card on it. I call and thank him. It was a little while before I got to cutting it up, but when I did I found lots of bugs, punk and some cool spalting. I prep a fairly large blank and rough it round and core a center out and wax it to dry. It proceeds to crack badly in several places. I turn off the wax and coat the whole thing with thinned epoxy to hopefully stabilize this mess. It's punky, bug-eaten, soft, hard, cracked and miserable. I turn it down to about 1/2� thick and go right through the epoxy layer that apparently did not penetrate as I had hoped. At least the bigger cracks are filled. While turning, the punky areas pulled out badly no matter how sharp my tools were. I used a ton of CA glue trying to solidify the soft areas. I cleaned out some of the bug tracks and fill with some key cuttings. On to finishing-another nightmare. Started by soaking with Bush Oil-my standard finish. It soaked up a ton of it. Set it aside to dry for quite a while. I thought it would be nice with a glossy finish which I rarely do. I am not set up to spray so went with a common wipe on poly. It soaked that up too. Coat after coat, sanding and more sanding. Got some bad runs and sanded most of it off and started over-more than once. I finally managed to get a reasonable result and stopped before I messed it up more. I did not really keep track, but I probably have close to 30 hours over several months in this piece. About 12� x 6� deep. It might be Maple. It's as done as it is going to get. Now I have to give it to it's owner-probably for Christmas. He is building a new house nearby and has a big woodlot. He even used a lot of his own wood in his house. I want to keep in his good graces for a while if I can. Sorry this is so long. 



