Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Revisiting peppermill hardware

Posts

Revisiting peppermill hardware

#1

Steve Kubien

Revisiting peppermill hardware

Steve Kubien

Well, I just got my first ever call on a peppermill with a Crushgrind mechanism that has stopped working. I'll see it tomorrow and see what is happening but my initial thought is the pestle has worn down. Is that possible with a ceramic one? I have no idea. This particular mill sees HEAVY use...4 or 5 homecooked meals per day plus table-side use in a family that loves pepper and it's been in use for approx 2 years (?), maybe 3. I can't remember.

Any other ideas?

Re: Revisiting peppermill hardware

#2

Jim in Burlington Ont.

Re: Revisiting peppermill hardware

Jim in River Oaks, Ont.

Hi,

That doesn't sound right... I have a few Crush grinds that get a lot of use and the feel has never changed, they are very durable in my experience.

All I can think of is that some how something very hard has been caught in the mechanism and perhaps damaged the unit, having said that, is there anytthing harder than a whole pepper corn?

Please share what you find, I am sure many of us will be interested in knowing what happened.

Take Care,

Jim

Re: Revisiting peppermill hardware

#3

Ellis Walentine

Which begs other peppermill questions...

Ellis Walentine

What brand of mill is it and where did you buy the mechanism? How do the crush grind mechanisms function compared to the regular ones? Are there ceramic and non-ceramic mechanisms and why prefer one over the other? How about regular mechanisms: Which are best, and who carries them? Is there a real Cadillac mechanism out there?

I have my own experience with most of these questions, but it seems a good time to revisit mills in general, as long as we're revisiting....

Ellis

PS Is the Colt type Forstner bit set worth the money?

Re: Revisiting peppermill hardware

#4

JL

Pebbles and sand?

JL

Maybe some "contaminant" in the peppercorns?

Re: Revisiting peppermill hardware

#5

Steve Kubien

Re: Pebbles and sand?

Steve Kubien

I certainly look into that. Not sure how I will tell my Sensei his peppercorns are bad without getting my head seperated from my shoulders though. Definitely an exercise in diplomacy. This ought to be interesting!

Re: Revisiting peppermill hardware

#6

Steve Kubien

Re: Which begs other peppermill questions...

Steve Kubien

Ellis, I use the Crushgrind mechanism exclusively. Never had an once of trouble until now.

The principle of it is the same as any other hardware except the mortar and the pestle are ceramic instead of steel. Some brands of salt mill hardware are ceramic, some are a weird polycarbonate thing.

Drilling out for the "regular" hardware is easier because there are only two bits required. Crushgrind mechanisms require 4 and a wee bit of measuring. The regular ones are pretty mindless to install.

Consensus on the regular type seems to be the Chef Specialties model is the best. Some chefs swear by Peugeot but I've never lookied into getting the hardware.

No opinion on the Colt bits. Never used them. I use the Lee Valley.

Re: Revisiting peppermill hardware

#7

JL

Where I get my spices *LINK*

JL

Maybe you could give him some for Xmas?

I use the Tellicherry black peppercorns and the Sarawak white peppercorns.


Some really good peppercorns

Re: Revisiting peppermill hardware

#8

Colt Forstner bits

Ed Moore in SW VA

I have two Colt bits and I will always choose Colt when buying in the future. This is especially true if I make peppermills. Nick Cook visited the Smith Mountain Lake Woodturners recently and he used Colts when making a peppermill. Nick recommends them and for good reason. They seem to cut easier than the traditional style Forstners.

Ed

Re: Revisiting peppermill hardware

#9

Bill Blasic

Re: Colt Forstner bits

Bill Blasic

Ellis,

They are expensive but well worth the money.

Bill

Re: Revisiting peppermill hardware

#10

Steve Kubien

Thanks for the info gents.

Steve Kubien

I'll look into them.

Re: Revisiting peppermill hardware

#11

Steve Kubien

An update

Steve Kubien

It turns out the little plastic sleeve that goes through the male part of the grinder (the pestle I guess) was cracked. No idea how that happens but I swapped it out and life is good. Customer is happy. No idea what may have caused this but I will be taking it up with the vendor (Lee Valley). Not their fault at all but they should be aware.

Thanks!

Re: Revisiting peppermill hardware

#12

Leo Cuellar

Glad it turned out well...

Leo Cuellar

Steve, and thank you for the info on the hardware. I've been considering making some mills, and it is great to have some solid intel.

Leo

Re: Revisiting peppermill hardware

#13

Jim in Burlington Ont.

Re: An update

Jim in River Oaks, Ont.

That is interesting, I can't imagine how it broke that way, but good to know. Thanks for following up, I have a few at hand I just looked at, hmmmmmm.

take care,

Jim

Re: Revisiting peppermill hardware

#14

Re: Which begs other peppermill questions...

Fred Holder

I'm not an expert on pepper mills, having only made one in my 22 years of turning.

I can address the Colt Drills question. Yes, they are worth the money. I'd never used a Forstner bit that would just cut right into the endgrain almost as fast as you can turn the crank on the lathe talistock, until I tried the Colt. Last year at Christmas time, my wife and I spent over $300 on the Colt Drills and I just recently spent another $200. I still don't own all of the sizes, but in my book they are the best Forstner bits on the market.