The enjoyment and fun I have with these is great . No 2 are the same as they all vary in size and timber
I can experiment with differnt textures effects,carving color Can you tell I hate this job l.o.l
This one is 250mm long made from Pohutukawa .This time I decided to cut in an over lapping feather pattern .Indian Ink was used as a base then I dry brushed on Gold and bronze followed by a scrubbing with a small wire brush so some of the wood is exposed
The Hull I originally had sitting on 4 carved feet but after I had textured the whole surface with a dremel I then decided to hold the piece up against a wire wheel and because the feet were cross grain the wire brush ate them for breakfast
The Wire brush was a brass one and I found by pushing hard it left a skid mark effect like the hull had been on a long voyage
Wish I could work out on this site how to put on multiple pictures in one go takes me forever to get these postings done by the time I resize e.t.c
The next in this series is started with small Pohutukawa flowers engraved in the over lapping bowls Watch this space
It's very easy to post multi. pics. All you have to do is shrink them down (I like "jpeg resampler" you can do multiple pics at once, and it's a free program).
Then using the "Upload embedded file" right above this text box start uploading your pics. Load one, hit it again, browse to the next pic and upload it, etc...