Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

The Word is SEASONAL

Posts

The Word is SEASONAL

#1

The Word is SEASONAL

charlie belden

This was done by Jim Gott for our club's President's Challenge. The key word for the challenge was SEASONAL. Summer, Fall, Winter - SPRING - a 3" diamter, black walnut spring - that compresses about 3/4" and springs back


Jim is probably the best turner technically in the club - and a perfectionist - with a very refined sense of aesthetics. This piece was a significant departure from the pieces he normally turns - though his turnings are always way above "normal". This one's Outside The Box.

Re: The Word is SEASONAL

#2

Re: The Word is SEASONAL

fgvanatta

Very interesting piece; definitely "outside the box."

Frank

Re: The Word is SEASONAL

#3

Re: The Word is SEASONAL

bernie feinerman

That is an impressive turning, and yes - it is definitely outside the "box" !

Any chance that he can be prevailed upon to write up his procedure?

Re: The Word is SEASONAL

#4

Re: The Word is SEASONAL

charlie belden

The process is basically the same as doing a spiral finial

1. turn the form

2. hollow it

3. draw lines down the long axis of the piece to divide it up

into as many parts as you care to - quarters as the miinimum

4. divide the length into four parts (more if you want more twists)

5. starting on where one horizontal line meets the end of the piece

rotate the piece to the next horizontal line and mark its intersection

with the first line that divides up the length

6. from THAT intersection, repeat the Rotate To The Next Horizontal

Line and Mark It's Intersection with the next Length Dividing Line

7. When you reach the other end of the piece and have the horizontal

and vertical lines intersection points marked - connect them - with

pencil line OR masking tape OR - better yet - Crepe Striping Tape

that's the width of your desired "spring wire"

8. With a fine tooth saw, cut along your spiral line, tangent to the line.

If you used Striping Tape, repeat the sawing process on the other

side of the tape

If you are working with a pencil line, go back to the end of the piece,

move away from the first mark that intersects the first long axis

line, move away the thickness of your desired spring and do the

same where the horizontal and vertical lines intersect/

Connect the dots to create the second spiral line that defines

the thickness of your spiral "wire.

Repeat the line drawing, masking taping of the spiral connecting

the dots

9. Saw along the second line

10, sand off the spiral wire's corners - or leave them square

At YouTube, search for "Charlie Neal" spiral finial

Re: The Word is SEASONAL

#5

Re: The Word is SEASONAL

bernie feinerman

Thanks for the suggestion. I will give it a try this winter. Any thoughts on what woods to use, or to avoid?

Bernie

Re: The Word is SEASONAL

#6

Re: The Word is SEASONAL

charlie belden

This one was done in black walnut but I imagine maple or cherry or any wood that isn't proned to tear out. or is brittle, should work. The wood of course has to be sound - no cracks, checks, inclusions or knots. And you have to hollow in end grain.

What might be interesting is to turn several springs, maybe in contrasting woods, and weave them together. OR - turn two, one with a twist in the opposite direction of the other. Maybe two "bowl springs" - or "hollow form springs".

Springs can be used several ways. They can be compressed, then released to shoot something up in the air. or causing it to bob up and down. OR - they can be twisted - and when released - spin something.

Plenty of possibilities using springs - even wooden springs.