Belt for Nove 3000
Jim Canning
OK where do I find them? I have tried every local place, I know that woodcraft has them but i hate to order just a belt as i am not in need of any supplies at this time. Someone has to have them.....right?
Knowledge You Can Build On — Est. 1998
Belt for Nove 3000
Jim Canning
OK where do I find them? I have tried every local place, I know that woodcraft has them but i hate to order just a belt as i am not in need of any supplies at this time. Someone has to have them.....right?
Re: Belt for Nove 3000 *LINK*
Galen Vetterick
Mike Mills gave you one on line location and I have used the following. Postage is low for an evelope item. If 230J6 is correct conversion then they have one.
They have a Gates at higher price.
http://kscdirect.com/item/PIX%2B230J6/A%2B%2526%2BI%2BPRODUCTS_230J6%2BJ-POLY-V%2BBELT%2B23%2522%2B6%2BRIB%250A
Re: Belt for Nove 3000
D. Hansen
beltpalace.com $8.80 + shipping of about $5 Micro "v" 230j6. I tried a longer belt but the 230 mm is just right. You might want a 4 ribbed belt don't know. The 4 ribs 230J4 are easier to adjust on the pulley.
I put a link belt on mine when I had it.
john lucas
How did you put a link belt in?
steven antonucci
Mine has a small ribbed pulley system? I couldn't put a link belt in?
S
Re: Belt for Nove 3000
Jim Canning
Thank you I just ordered 2, at a very good price!
John probably turned wood MICRO links!
Galen Vetterick
Re: How did you put a link belt in?
john lucas
Steve Mine had V belt pulleys. Maybe it was older.