Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Buffing Question - Pretreating

Posts

Buffing Question - Pretreating

#1

Jim in Burlington Ont.

Buffing Question - Pretreating

Jim in River Oaks, Ont.

Hi,

I have noticed a few suppliers who sell buffing wheels now are also posting that It is recommended that the final piece be pre-treated with Danish Oil. I have never done that, am I missing something here?

Why would you want the final piece to be pre-treated with Danish Oil?

Take care,

Jim

Re: Buffing Question - Pretreating

#2

Re: Buffing Question - Pretreating

Fred Holder

You should make sure the Danish Oil has a chance to fully dry before buffing. I'm not sure what the oil does, but it does soak into the wood. I mostly use Walnut Oil (actually the Mahoney Utility Finish Walnut Oil). The Walnut Oil takes a bit longer to dry before buffing, but the results are good. I recommend a three buff system, finishing with Carnuba Wax. Don Pencil has a three buff system as does Beall. I have both systems and can't tell the difference in the finish produced by each of them.

Re: Buffing Question - Pretreating

#3

Jim in Burlington Ont.

Re: Buffing Question - Pretreating

Jim in River Oaks, Ont.

Hi Fred,

Thanks for your answer, yeas that is what I have done for many years, even building up a finish as many do, but the advert sounded like you pretreated piece wet and then buffed, that is why it sounded strange to me.

I use my Beall on all my pepper mills and other projects, i have a unique set up for my pens that is my own home made buffer combo, no oil..:-)

Take care,

Jim

Re: Buffing Question - Pretreating

#4

Re: Buffing Question - Pretreating

Dave Peebles Lyons, Ohio

Hi Jim,

Do you have a link to who says that?

Dave

Re: Buffing Question - Pretreating

#5

Re: Buffing Question - Pretreating

john lucas

Buffing it wet would just mess up your wheels. I have never pretreated with anything. The most important part of buffing I think is to let the finish cure long enough. Some lacquers will be really soft for several days after they dry.