Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Lathe belts/belt bugs?

Posts

Lathe belts/belt bugs?

#1

Lathe belts/belt bugs?

Jim Canning

I really want to thank the ones that posted earlier this week about broken lathe belts. I went in to my shop this morning to do a little Thanksgiving Turning and after about ten minutes I started hearing a strange noise coming from the gear box on the Nova 3000. This strange noise slowly got louder and after finally looking inside what did I find but the belt coming apart.

Now I am not saying that this would not have happened anyway but it is very strange indeed that it happened the same week as the post. Are there such things as belt bugs????

Re: Lathe belts/belt bugs?

#2

Re: Lathe belts/belt bugs?

Jim Canning

Oh yea I guess I should have asked what is the best type to replace the belt with and the best place to get it from?

Re: Lathe belts/belt bugs?

#3

Mike Mills

Re: Lathe belts/belt bugs?

Mike Mills

Nova list the belt part as 584J6 Belt Poly Vee

If the 584 is the circumstance (in mm), then that equals 22.992 (or 23) inches.

Here is a link to a belt company that carries the 230J6 for about � the price of the OEM belt from woodturning suppliers.

http://store.beltpalace.com/230j6.html

If you give them a call they may be able to tell you if it works or not. I do not know if they come in different widths or not.

Re: Lathe belts/belt bugs?

#4

Belt Bugs?

Galen Vetterick

I had not heard of any infestations of belt bugs lately but you better check that lathe for bed bugs as they sure have been spreading. They show up as little dark places on the bed but they should not be confused with rust blooms or sap spots.

My lathe has got a bad case of the dust bunnies today.

Re: Lathe belts/belt bugs?

#5

Re: Lathe belts/belt bugs?

Darryl

the size for the 3000 is a micro "V" belt J 213-6. the 213 is the length the -6 is the number of ribs. I have run both the -6 and -4. I like the -4 since is gives more room for adjustment on the pulley ribs. Should run less than $10 at any place that sells "Gates Micro V " belts.

Re: Lathe belts/belt bugs?

#6

Re: Belt Bugs?

Jim Canning

Don't they have a ointment for that?