Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Another lathe belt question?

Posts

Another lathe belt question?

#1

Steven Antonucci

Another lathe belt question?

steven antonucci

I have a belt on my Nova lathe, and I wondered if they wear out eventually? I have a lot of hours on it, and I guess that a new belt would perform with less vibration?

Anyone have any data on how many miles you get on a belt?

Steve

Re: Another lathe belt question?

#2

Re: Another lathe belt question?

Darryl

Broke one the first month. Replaced it and ran it for over two-three years. Properly adjusted they run a real real long time. The replacement was only a four rib rather than the 6 on the original. Ribbed belts are designed to drop into the valleys of the pulley when the torque increases. So with the fewer ribs the pressure on the pulley would be lower I guess. Anyway I purchased a spare and still have not used it. I can't remember the name of the vendor for the replacement something like belts belts belts. Much less expensive than the Teknatool replacement. If interested I'll research my files for the name. Any way to answer your question if you adjust the belt properly it will last for a considerable length of time. Darryl

Re: Another lathe belt question?

#3

Re: Another lathe belt question?

Ed Wujciak

I used the original belt on my Nova 1624 for about 3 years. It started to fray around the edges so I put a new one in. It did run a bit smoother. It's actually a consumable, like your wiper blades. New belts at belts4less.com. Under $12 including shipping.

Re: Another lathe belt question?

#4

Re: Another lathe belt question?

Stuart Johnson

My first one a little over a year. The second plus the spare where ever it is over eight years.

Re: Another lathe belt question?

#5

Walt Bennett

Re: Another lathe belt question?

Walt Bennett

I've had the original belt on my Stubby for over seven years, the original on my Jet mini for about five, and the originals on the three Delta 46-460s (I was one of the pre-production testers) for all the time I had them. Never had a belt break on me - now that I've said that, one'll probably go tomorrow!

Re: Another lathe belt question?

#6

Re: Another lathe belt question?

Steve Harder

Ed - can you give me a product # for correct belt for 1624 at belts4less.com?