Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

1937 Platter

Posts

1937 Platter

#1

1937 Platter

Jack Savona

My Father-in-law has had this 14 inch platter pictured below in his house ever since my wife could remember. Last month she told him how much she has loved this platter all her life. Come to find out my wife's deceased Mother made this in a high school shop class back in 1937. Neither she nor I knew anything about her Mother ever doing any woodturning (let alone carving).


Needless to say we were both blown away! I asked to borrow it so I could share this with all of you.


Her carved detail amazes me. Today we're looking at woodturnings becoming embellished and slowly evolving into "wood art" done by so many creative professionals who post here.


Yet here was my Mother-in-law, Rosemary Ashenfelter, a 17 or 18 years old girl growing up in the Depression in Kansas, working without a chuck, without fancy tools and an expensive lathe, without motorized bits on a reciprocating carver, and without the years of experience so many of us have, producing a beautiful turning that will become a family heirloom.

It appears to be two pieces of a light mahogany glued together, stained and highlighted.



Sure wish she was still here so we could turn together. She was and still is an inspiration to our family. So is her talented husband at age 94.

Re: 1937 Platter

#2

Re: 1937 Platter

Carole Valentine

That is amazing, Jack! Would have been wonderful if she had signed it, but thank goodness it has stayed in the family and you were made aware that she was the turner/carver...it could have so easily disappeared in a yard sale or something.

Re: 1937 Platter

#3

Re: 1937 Platter

robo hippy

Girls didn't get to take woodshop back then either. Just out of curiosity, where in Kansas? I grew up on the MO/KAN border, St. Joe, to be exact, "where the Pony Express began and Jesse James ended."

robo hippy

Re: 1937 Platter

#4

Awsome

Mike Foster

That is really a treasure. Even more special since it came from the hands of an ancestor. I had a patient bring me in the segmented turning shown below, from the early 1900's. I thought that was cool, but your platter is beats it hands down.

Mike


Re: 1937 Platter

#5

Keith Tompkins

Re: 1937 Platter

Keith Tompkins

Jack, that is a wonderful platter! She did a wonderful job; no doubt she had a true master for a teacher. Traditionally, the very best turnings, especially furniture parts, were carved. In this case, the carving transforms a "nice" platter into a masterpiece...one that few current turners could duplicate. One can barely imagine the work she could have produced had she persued the craft! Thanks for posting.

After viewing this piece, could someone please explain to me again why we shouldn't carve our turnings?

Re: 1937 Platter

#6

A real treasure

Janet Bequeaith

Re: 1937 Platter

#7

Leo Cuellar

Re: 1937 Platter

Leo Cuellar

That is a really nice piece of work! Thank you for sharing a bit of your family treasure with us.

Leo

Re: 1937 Platter

#8

Re: 1937 Platter

j. paul fennell

Jack,

Thank you for sharing this--it is remarkable in many ways, not to mention the design and workmanship. The very fact that a female was allowed in a workshop at that time is amazing in itself. It did not happen, even a generation later during my time in high school. The screw holes are an important part of the history of the piece, and I'm glad they are not covered up with something like green felt--like trying to hide some defect or problem. They are there, plain and simple.

Re: 1937 Platter

#9

Barb Siddiqui

Wonderful!

Barb Siddiqui

I can imagine how that blew you both away. What a great surprise. I remember when I learned my 98-yr. old grandmother had once been a prize-winning skeet shooter. We miss so much by not asking them lots of questions. That is a beautiful platter; two pieces joined together, was probably salvaged furniture pieces to just use whatever they had. Thanks for posting this.

Re: 1937 Platter

#10

Re: 1937 Platter

Jennifer Indy.USA

Jack thank you for posting this wonderful platter. What a great story to start the day. As J Paul said it's amazing she even got to be in the workshop at all back then. In my 8th grade year of Jr. High school(1977) I wanted desperately to take woodshop, metals and mechanical drawing but it wasn't allowed. After my parents went to the school board and convinced them I'd get more out of it than Home-economics, they begrudgingly agreed to let me into those classes. I loved them! I still couldn't hem a skirt if I needed to but hey, that's what alteration shops are for right. I loved your post. You should think about writing an article for the AAW Journal about it. I think it would touch a lot of people.

Jen

Re: 1937 Platter

#11

Betty Scarpino

Re: 1937 Platter / journal article

Betty Scarpino

Jen, I was thinking the same thing ... a short article and photos would be nice to have in the journal.

Re: 1937 Platter

#12

Steve Kubien

Brilliant

Steve Kubien

That's a beauty to be sure and the fact that it was made by family, even better. This platter oozes comfort and warmth.

Thanks for sharing.

Re: 1937 Platter

#13

Fantastic !

Don Orr

Thanks for sharing.