Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Kelton Hollowing Rig Clearance

Posts

Kelton Hollowing Rig Clearance

#1

Kelton Hollowing Rig Clearance

Bill Howatt

How much distance is required from the middle of the bed to a wall located behind my General 260 for the standard size Kelton Hollowing rig's piece that is mounted perpendicular to the bed? I have about 18".

Thanks,

Bill

Re: Kelton Hollowing Rig Clearance

#2

DARN!~  I Thought there was a sale   

George Guadiane

Re: Kelton Hollowing Rig Clearance

#3

Re: Kelton Hollowing Rig Clearance

Terry Scott

Bill I stand around the back of my lathe when using the rig so 18inches wont even fit my gut

Seriously I find having the lathe clear all the way around means I have more freedom to get the tools on angles that I couldn't normally do if against a wall

I think your 18 inches maybe a bit tight for the long rails sorry to be the convener of bad news

Re: Kelton Hollowing Rig Clearance

#4

Re: Kelton Hollowing Rig Clearance

glenn roberts

Terry is correct. having plenty of space around the bed is something we don't think about enough when setting up a lathe. Similarly the lathe manufacturers don't think about having a switch that is readily accessible when you around on the other side of the bed.

If you do make a few mods to your set up it will make a big difference.

Re: Kelton Hollowing Rig Clearance

#5

Re: Kelton Hollowing Rig Clearance

Barbara Gill

I left about 2.5 feet.So farIhave enough room.

Re: Kelton Hollowing Rig Clearance

#6

Steven Antonucci

Fixing the remote switch iissue

steven antonucci

Here is what I did to resolve the issue you discussed. It's a magnetic backed switch that I plug the lathe into. The lathe has a switch on the motor at the headstock, and I position this one at the tailstock end. It gets plugged into the wall, and the lathe gets plugged into it.

If I need to turn the lathe off, either switch kills power. Cost me about $30, and requires no electrical skills...


(If you see that black box on the right stuck to the legs, that's it...)

Best of all, the switch has a big, push to kill button that I can hit with my knee if I don't have a hand free...

Steve

Re: Kelton Hollowing Rig Clearance

#7

Thanks, need to do some thinking!

Bill Howatt

Re: Kelton Hollowing Rig Clearance

#8

Dick Hines

Re: Thanks, need to do some thinking!

Dick Hines

A kill switch is a good thing to have when hollowing. I put on my PM and use it all the time. I stick it on the side of the bed, at hip height. Then/when something bad goes wrong I can just bump with my hip. No reaching around to the headstock. Which puts you in the line of fire.

If your lathe is powerde with 220 I don't think you can get one of the plug in switches that work with 110.

Re: Kelton Hollowing Rig Clearance

#9

Re: Kelton Hollowing Rig Clearance

Carole Valentine

Bill,

Besides the info I emailed to you, I also, like Terry, stand at the back of the lathe sometimes when using the hollowing rig. Having a clear area all around the lathe helps in lots of ways with some other things as well and I highly recommend it if at all possible. Sometimes I turn in reverse, standing at the back, if I have particularly grouchy piece of wood that doesn't seem to respond well in any other way.