Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Shipping blanks to Australia

Posts

Shipping blanks to Australia

#1

George Taylor

Shipping blanks to Australia

George Taylor

The father of one of my wife's good friends is a turner who lives in Australia. The lady (his daughter) wants to send him some wood (native to the US) as a gift. All she has been able to send in the past is pen blanks without restrictions, fees and/or quarantines that make the whole process unworkable. She was told that some or all of this can be avoided if the wood is properly sealed. What experiences do others have in shipping wood? Are there services or suppliers that do this kind of shipping? She would like her dad to get a chunk of mesquite. I guess what we call "domestic" could be considered "exotic" overseas. :)

Thanks

George

Re: Shipping blanks to Australia

#2

Re: Shipping blanks to Australia

Barbara Gill

It is possible that all you might have to do is put a coat of a surface finish on it.

Re: Shipping blanks to Australia

#3

No Bark!

Allen Neighbors

If you send wood to Oz, you don't want even one scrap of bark on it. And no worm holes in the wood.

I sent some Mesquite, and a piece of Bois d'Arc over on slowboat, and when it got to Customs, they opened it, saw the bark, and irradiated the wood. My friend had to pay close to $40 AUD to get it. And I had already paid over $40 USD to send it to him.

They told him if the bark hadn't been on it, he could have had it earlier, and at no cost.

That's all I know about it.

Re: Shipping blanks to Australia

#4

Re: Shipping blanks to Australia

robo hippy

Use flat rate postal boxes, max weight 20 lbs for big box.

robo hippy

Re: Shipping blanks to Australia

#5

Jesper, Denmark

Re: Shipping blanks to Australia

Jesper, Denmark

There are worldwide restrictions on shipping wood. The wood has to be certified that it has been treated to kill any insects or any other disease causing stuff in the wood.

If not certified, you risk that it will be confiscated on arrival and destroyed.

Re: Shipping blanks to Australia

#6

Re: Shipping blanks to Australia

Dick Coers

One of the old tricks of importing, was to make the slabs into something. I heard that a lot of slab entrance doors came into the states, then were ripped back into boards for sale. Could you sand the blanks, run a router bit around them, throw on a thin coat of shellac, and call them cutting boards, or table tops? Just thinking out loud and have no idea if that will work.

Re: Shipping blanks to Australia

#7

Re: Shipping blanks to Australia

Terry Scott

Hi George

I send wood all around the world and take wood whenever I travel for Demos E.tc

Ive never had any problems

Just make sure there is no bark or evidence that vermin have been anywhere near the wood

Sealing all over with end seal is a good Idea as well

I usually mark on the box that the timber has been microwave treated before shipment

Also keep the price on the declaration down below $300 Australian or you might get hit with Gst

I think you will find From the Us is fine anywhere in Asia gets the third degree

You could always drop a line http://www.daff.gov.au/ba

Re: Shipping blanks to Australia

#8

Re: Shipping blanks to Australia

glenn roberts

Australian quarantine can be very strict ( with good reason) On one trip back from New Zealand I declared some epoxy covered mdf templates ( bugs would love eating the stuff in the mdf -Lol) and they got the real check over. They were OK but I would check first before assuming anything.

Re: Shipping blanks to Australia

#9

Dick Hines

Re: Shipping blanks to Australia

Dick Hines

A friend of mine imports Australian burls. They have to have no bark and sealed and inspected. Then if he sends any to the Great White north he has to go throught more restrictions.

Sure drives up the cost of the wood.