Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Micro goblet photos

Posts

Micro goblet photos

#1

Micro goblet photos

John Lucas

Finally had time to take photos myself and to get them measured at or lab on campus. It was really challenging just picking this thing up. It is really really small. That's a 1/16" drill bit next to it.





for those who don't speak micron's this goblet is .048" tall, .024" wide and the stem is .008" For a size comparison Human hairs average around 3 or 4 thousands.



The yellow heart goblet is a hair over 1/8". It is the smallest I was able to make with a captured ring.

Re: Micro goblet photos

#2

Re: Micro goblet photos

Matt Overton

John, all I can say is you are the man!!

Matt

Re: Micro goblet photos

#3

Re: Micro goblet photos

bill Crommett

John: Not to take away from the skillful job, but is that 1/16 in drill dull or is it a depth of focus problem ?

Re: Micro goblet photos

#4

Re: Micro goblet photos

john lucas

Bill I shot this at F16 and had very little depth of field. Of course that was a school drill bit and could easily have been abused. So it might be alittle bit of both.

Re: Micro goblet photos

#5

Re: Micro goblet photos

Ron Lynch

So, how many micro-liters will it hold?

Re: Micro goblet photos

#6

I showed my wife...

GaryG in MD

and it blew her mind.

Nice job, Gary

Re: Micro goblet photos

#7

Leo Cuellar

Re: Micro goblet photos

Leo Cuellar

Great pictures, John. Have you achieved the record yet?

Re: Micro goblet photos

#8

Rob Wallace

If no one has called the Guinness Book folks....

Rob Wallace

.......somebody should!

I'll call the Guinness Brewery and try to get them to serve some stout in one of the goblets! ;)

Rob

Re: Micro goblet photos

#9

Steven Antonucci

you need a hobby!

steven antonucci

I have to laugh every time I see these, John. I'm betting that you could go smaller if it wasn't for the material. You should chuck up some rice or a grain of sand or something...

If I walked in with that, my wife would just shake her head at me...

S

Re: Micro goblet photos

#10

It all started with Rice

John Lucas

I found out pretty quickly that rice was both too large and too fragile. Even soaked in thin CA it broke really easily. Now a grain of sand might be interesting. Anyone know where I can get carbide tools that small.

Re: Micro goblet photos

#11

Awesome !

Don Orr

Re: Micro goblet photos

#12

Rob Wallace

Maybe not carbide.....

Rob Wallace

Hey John - About a grain of sand - I don't think that carbide would cut it (literally)! - you'd have to have some form of corundum-like abrasive (higher than 7 on the Moh's scale) to use on silicates (...grains of sand?), since they will not shear with even the sharpest carbide edge (although you might get fractures of both the silica and the carbide). Now soapstone might be another matter if you're going to attempt micro-turning mineral materials.

Have you tried wet osage orange? Holly? African blackwood? I would think woods with the smallest cell size and fairly dense structure (...rules-out ring-porous woods?) would turn best the smaller you get. Have you tried micro-turning Corian? I am amazed, and motivated to give it a try...!

Thanks for showing us these excellent turnings..... and the macro images!

Rob

Re: Micro goblet photos

#13

Re: Micro goblet photos

Bob Macgregor

Well, if ants show up at your next picnic, you'll be ready to serve them a small taste of wine.

BOB

Re: Micro goblet photos

#14

Re: Maybe not carbide.....

John Lucas

Holly was too flexible, Osage orange has small pores that blow up. Blackwood works pretty well but I didn't have any I wanted to waste for this project.