Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Powermatic 3220B

Posts

Powermatic 3220B

#1

Powermatic 3220B

Steven Smith

My Powermatic 3220B just stopped without warning. It happened just as I got a catch. There is power to the machine but the motor will do nothing. I do not find a reset button. Any ideas? Thanks Steve

Re: Powermatic 3220B

#2

Re: Powermatic 3220B

George Guadiane

Try this

Unplug it

Turn it on, turn it off

Plug it in

Turn the rotations down and turn it on.

Re: Powermatic 3220B

#3

Re: Powermatic 3220B

Bill Howatt

If you haven't, try unplugging it, wait 30 seconds and then plug it in again and try it.

Bill

Re: Powermatic 3220B

#4

Re: Powermatic 3220B

Terry Gerros

The reset switch is on the inverter (that little white box on the back of the headstock..or whatever that thing is called) Yes, this has happened to me a couple times.

Re: Powermatic 3220B

#5

Re: Powermatic 3220B

Steven Smith

Yea Its working! Thanks for the suggestions. I just knew that was going to turn out to be a $600 hollowform.

Re: Powermatic 3220B

#6

Re: Powermatic 3220B

Terry Gerros

Just another funny story to add......I wired in a kill switch into my lathe and the first time I used it I forgot to turn the kill switch back on. Next day I go into the shop and now my lathe won't turn on. Unplug it, plug it back in, hit the reset button...nothing. Sitting here scratching what few hairs I have left on my head....I just can't for the life of me figure out what was wrong....then of course the light comes on in my head....the kill switch you nimrod.....Now I have only pulled that one twice.....

Re: Powermatic 3220B

#7

Re: Powermatic 3220B

bill Crommett

Terry: Would you like to join my SLOW LEARNERS club? I am the current president and the dues are $.02 payed forward.

Re: Powermatic 3220B

#8

I think I should be grandfathered in. 

john lucas

Re: Powermatic 3220B

#9

Re: I think I should be grandfathered in.

Terry Gerros

Hey Bill,

I think I am paid up through the year 2050......

Terry

Re: Powermatic 3220B

#10

Re: I think I should be grandfathered in.

bill Crommett

Terry: I hope you are not asking for a refund. I am due to cash out sometime in the next four years, and then it will be someone else s turn to take over the prime spot.