I got a commission!
karl jr
25 (possibly more) NE edge bowls, 7" to 9" in diameter.
1 month deadline.
Woohoo!!!
KTK
Knowledge You Can Build On — Est. 1998
I got a commission!
karl jr
25 (possibly more) NE edge bowls, 7" to 9" in diameter.
1 month deadline.
Woohoo!!!
KTK
Re: I got a commission!
Dick Hines
You had better stay off the computer and spend more time on the lathe.
Congrats!!!
Re: I got a commission!
Mike Johnson
How do you plan to dry and finish the bowls within the one month deadline? My method of rough turning, drying in a bag, finish turning and then finishing usually takes 6 months plus. I would love to know how to shorten it to days.
Re: I got a commission!
Donna Banfield
Mike, I'll offer a suggestion as to how Karl might meet that deadline -- because he's probably out working on those bowls in the shop right now.
If they're natural edge, he's likely going to turn them once, to final thickness, and sand and finish them. Yes, they'll warp out of shape as they dry, but because they're natural edge, the warping will be less noticeable, and actually enhance the elongation that the bowl will experience when it's finished warping and drying.
Then, when an unknowing customer asks how he turned an oval bowl on a lathe, he can reply (with a twinkle in his eye) "I'll tell ya, but then I'd have to kill ya" ;^)
What Donna said
karl jr
Mike
Donna explained most of the process I'll be using. I also let the bowl air dry as long as possible before a final sanding (off-lathe) and then apply an oil finish. The very last steps are to sand the bottom flat to get rid of any wobble caused by warping, touch up the finish, and then sign them.
If I start to run out of time I might pop them in the microwave for a couple of quick heating cycles, although I haven't tried that yet.
KTK
2 down and 20 to go.
Donna, you beat me to the punch(line)
karl jr
I usually say that I have to move the gouge left and right really fast in order to make an oval bowl 