Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Take me to your Leader! (prototype)

Posts

Take me to your Leader! (prototype)

#1

Leo Cuellar

Take me to your Leader! (prototype)

Leo Cuellar

Sorry for the poor quality of the picture, I was trying for mood lighting :\ Had to try something fun as I am returning to the "day" job full time this Sunday.

I think Charlie Belden was probably the biggest inspiration for this project, and that great finial that Bob Edwards put on his cherry "post". :D



Was trying to get a googly eyed effect, but looks like the little guy has a detached iris in the right eye. I'm not as "lucky" as Mike F. :( I think its missing a few pieces... but I'm not sure what yet. The main body is 6" w x 3" h, cherry, with walnut, maple and mahogany.

Comments & critique are always welcome, if not always implemented :b

Re: Take me to your Leader! (prototype)

#2

Re: Take me to your Leader! (prototype)

Matt Overton

I like it. looks like you're having fun.

Re: Take me to your Leader! (prototype)

#3

Thanks for the chuckle...... I love it!   : )

Ruth Niles

Re: Take me to your Leader! (prototype)

#4

Love the eyes- very funny

john lucas

Re: Take me to your Leader! (prototype)

#5

He, he, is good as is!!

Jorge Casta�eda

Re: Take me to your Leader! (prototype)

#6

Steven Antonucci

"I'm going to blow up the Earth"

steven antonucci

love it...

Perhaps you could turn some portholes on the flying saucer too?

Re: Take me to your Leader! (prototype)

#7

Mike Stafford

Klaatu barada nikto......

Mike Stafford

Re: Take me to your Leader! (prototype)

#8

Steven Antonucci

My geek detector just went off!

steven antonucci

Although I suppose that the fact that I knew you were writing in Klingon means I may have set it off instead of you...

S

Re: Take me to your Leader! (prototype)

#9

Re: Take me to your Leader! (prototype)

charlie belden

Well ALL RIGHT - someone having FUN! And the result spreads some fun around. While "elegant" and "delicate" and "beautiful" are wonderful - and doing pieces that are "challenging", "difficult" etc. - don't usually involve much child like (not childish) fun. We need more fun in our turning repetoire - and to do it more often. The turning experience is completely different when you're having fun - and doing a fun, rather than "serious", piece

I love this crazy creation. I saw Daffy Duck.

So with a little bleaching, and a couple of holes drilled . . .


A little fun and silliness is a wonderful thing.

Re: Take me to your Leader! (prototype)

#10

Re: "I'm going to blow up the Earth"

Stuart Johnson

Great you post about blowing up Earth and WC locked up for me. Maybe you brought Homeland Security into the woodturning world :b

Re: Take me to your Leader! (prototype)

#11

Steven Antonucci

Customs and Border Protection

steven antonucci

It's a reference to Martin the Martian from the old Looney Tunes cartoons. I wonder if CBP has jurisdiction in three dimension? :)

S

Re: Take me to your Leader! (prototype)

#12

Re: That wasn't Klingon

Frederick Nelson

That came from the movie "The Day The Earth Stood Still" produced by Robert Wise 'round about 1951. Klatu was played by Michael Remy.

Fred

Broken skies in Eastern Missouri

Re: Take me to your Leader! (prototype)

#13

Steven Antonucci

Setting off the "old school geek detector"

steven antonucci

I didn't realize it had a black and white setting :)

S

Re: Take me to your Leader! (prototype)

#14

Leo Cuellar

Re: Take me to your Leader! (prototype)

Leo Cuellar

Love your "modifications", Charlie! Run with it, or from it! There are so many variations of this form possible. I've been busy trying to let some of the little demons out of my head by sketching & writing in my notebook. Hopefully I'll be able to get my Christmas variation done in time :D !

You and your "Houston,..." piece got the eyeball stuck in my head... so to speak.

Re: Take me to your Leader! (prototype)

#15

Bob Moffett

Re: Take me to your Leader! (prototype)

Bob Moffett

I really like it. It makes me laugh.

Re: Take me to your Leader! (prototype)

#16

Leo Cuellar

I was thinking Death Ray...

Leo Cuellar

Steve, and I've been making plans, er, sketches. Portholes are a great idea! I'm not that experienced at multi-axis turning, so I'd probably have to glue some on.

Re: Take me to your Leader! (prototype)

#17

Leo Cuellar

Ooops, correction...Mike S.

Leo Cuellar

Re: Take me to your Leader! (prototype)

#18

Leo Cuellar

Glad to spread a smile!

Leo Cuellar

Or a little chuckle. :D This is going to be a fun little form to play with for a long time to come. It will give me a chance to try out a lot of the cool things I've learned from all of you folks!

Re: Take me to your Leader! (prototype)

#19

Mike Stafford

You are not as geek as you think!

Mike Stafford

Klaatu barada nikto is not Klingon. This is the message Michael Rennie (Klaatu) asked Patricia Neal's character (Helen) to deliver to Gort (the robot) should he become injured.

Let us say Gort takes it from there and Sam Jaffe who plays Professor Barnhardt sees to it that the foolish politicians and military do not get the Earth destroyed.

Re: Take me to your Leader! (prototype)

#20

Steven Antonucci

Look at Terry Scott's set-up.

steven antonucci

I think you could turn them if you built a carrier board like TS uses? Wouldn't be multi-center, really, as it's kind of just orienting the UFO to turn the porthole on center...

S

Re: Take me to your Leader! (prototype)

#21

Steven Antonucci

Pegging the meter, Mike...

steven antonucci

If you tell me you know their birthdays and best friends name, it'll blow a fuse...

It's a great film, and thank god you didn't say Keanu Reeves...

S

Re: Take me to your Leader! (prototype)

#22

Leo Cuellar

Re: Look at Terry Scott's set-up.

Leo Cuellar

Steve, his sled is a very cool setup, he sent me an article about it. When Terry tells me I'm crazy to try something I listen(Although, I did have to break a few tools to make sure he wasn't pulling my leg)! Not having a lathe with EVS, or indexing makes alignment & balancing a real PITA for something as delicate as portholes. I'm going to have to put bigger & more lag bolts in my lathe legs to keep it on the floor. Already busted one of them, (they sure don't make 'em like they used to) should have drilled the holes larger to start with.

On the plus side of returning to work FT; I'll be able to afford a new lathe before spring. I'm considering the top of the line Grizzly as it has the weight & features to take me where my turning seems to be heading...

In the meantime though, there are still lots of cool things that I can do with what I've got. :D L

P.S. Can't wait to see what you're up to with that walnut!

Re: Take me to your Leader! (prototype)

#23

The Day The Earth Stood Still

charlie belden

To really appreciate this film you must understand its historical context.

The film was released during the early part of the Cold War, the memory of the horrors of WWII still in the minds of the population, the Cold War, with its Iron Curtain and the possibility of Nuclear Destruction heating up in Korea, North Korea still a hot spot to this day.

There were all kinds of horror movies involving radioactive monsters spawned by nuclear testing. A mushroom cloud figuratively hung over our heads and Civil Defense and Back Yard Bomb Shelters were in plenty of people's back yards. Guys like Tailer Gunner Joe McCarthy were ranting and railing about COMMUNISTS under our beds - and in all levels of our government - slandering dedicated civil servants and destroying their careers - for his political gain.

It was in this context that The Day The Earth Stood Still should be seen. It showed us that fear and paranoia and shoot first and ask questions later - have a horrible price tag - and that there are beings that are more altruistic and benevolent that survived this insane period of civilizations' development - and thrived. Not only did they thrive, but they reached out to help other civilizations with their knowledge and technology.