Osage and Walnut box- recovery job....
Mike Stafford
Here is a box that almost ended up in the firewood pile.
When I had the lid jam fit on the body of the box some skillful turning resulted in me snatching the lid right off the body and when it hit the ways, the frame and the stand of the lathe on its way to the floor it managed to chip off a nice chunk. The chunk that broke off was so large that I could no longer use the piece of osage for the lid. I did not want to try and glue it back together.
Never wanting to accept the loss of a piece of wood I looked around and found a piece of walnut the correct size to turn for the lid. I don't usually fit the body to the lid but I had no choice. I turned the lid and salvaged enough of the broken osage orange lid for an insert to give the plain end grain of the walnut some visual interest.
The finished box is 3 1/4" in height and 3 1/2" in diameter.
JKJ gave me the osage orange and I believe the piece of walnut I used to salvage the lid also came from him.
Comments, friendly jabs and critiques appreciated.... 

)


