Some of you may know about the LED lights available at Ikea... $9.99 each (I bought 16 - a few too many).
In any event, I always have light issues, so I thought I'd gang them up and use them at the lathe, and maybe even be able to line them up and use them to back light THIN turnings. That is yet to be seen.
I used a piece of walnut to make this articulated arm thing, took a few hours, as I made it as I went along, figuring it out as I went.
Brandon my (step) son cut the wire cage off of its main shaft and then cut it short so that I could use the post to mount the arm on. I drilled the walnut JUST snug and there were stubs left on the post, so the fit was tight... The pin holder for the shaft is a bit sloppy, I'm not quite sure what I'm going to do about that, but this was what I came up with...
Folded
Open
Open Surround
Back side with the wires hanging out (I'm gonna wrap them up sommehow
I was heading home from DC yesterday and stopped and picked up two lights. Thought I was stepping out getting more than one. Looks like a useful light.
Bought five last week. Going to trim the bases or make some to fit a 1" rare earth magnet setup. FYI (to all) , amazingmagnets.com, has the best prices I've found on the larger magnets.
We live nowhere near an Ikea, but my wife was just in Hartford last weekend and I tasked her with going to one near there to pick me up 4 or 5. Didn't happen. She was at a knitting symposium's marketplace at the convention center and it was rush hour by the time she was free. She didn't want to battle the traffic. Shows you where I rate.
I was working with a beginner today, I put one light on where the tool should be cutting and another on the far side outline, you know, where we look when we want to cut.
I was able to show him with the lighting, how to see in a better way - in the way that allows for a clean flowing line.
That alone was worth it in my mind. I have to be away from the lathe today and tomorrow, but Wednesday, I'm going to give the lighting some REAL testing! I'll let you know more then, but so far
Nick thanks for the heads up on the best magnet prices!
the flexible necks had turned hollow forms on one end - with servo controlled eyeballs looking about - but mainly looking at something - that isn't actually there.. If you've ever stood on a busy street corner - and looked up and seem to be staring at something interesting, it's amazing how quickly others will start trying to see what you're looking at. Once you get a half dozen to a dozen people doing it it becomes self perpetuating and you can leave. Sometimes, even when the pedestrian sign switches to WALK, some will remain on the corner looking up, searching for the thing others apparently were looking at.
Monkey See, Monkey Do is a fun and harmless game to play once in a while ; )
BTW politicians are VERY good at it - as are some religious "leaders".
"You can shop from your home or office through IKEA Direct. I am bringing up their contact information now. The phone number for IKEA Direct is 800-434-4532. "
So I'm guessing that if you have a friend with a copy of the catalog, you might be able to order them that way. I'm waiting for my copy...
In the earlier thread on these, I had offered to buy and send these lamps to anyone who is not near an IKEA. I filled a couple of requests, and have another one pending. You get it at cost plus shipping--it seems the cheapest is the Flat Rate USPS Boxes (actually, I was shocked as to how much the price seems to have gone up!)
If you can get them directly from IKEA via the phone number that Leo quoted, then great. The items are on the link below (at the bottom of the page).
If not, and you want me to get them for you, let me know, and I'll collect the orders, and ship them out to you, and you can send me a check.
Dinyar, on the page the lites are listed it says that they are not available except at the store and The closest to me is Alanta, GA which is about 200 miles away. I can't figure out to email you directly so I hope you get to read this. I would like three if you can get them for me. Let me know and I'll send you my address. Thanks alot. DonL
You got it. I sent you an e-mail----if you don't get it, it's in your SPAM folder---many spam programs think that my name has to be generated by a computer!
I would like to purchase four of the lamps but can not find your email address. If you will send me a message I'll send you my address. Please let me know the amount due and your address I'll get a check in the mail.
me too. I thought I had some coming last week when my wife went to Hartford, but she ended up not getting to Ikea. I would like 5 if you can. I can get a check in the mail if you get me a figure. Thanks!
Dinyar, I didn't get your email, I tried to find the spam, junk folder with no luck so if you would please try this email address; porkiesnm@hotmail.com. I'm to old to teach an old dog new tricks with a PC. Regardless I still want 3 of the lites and if I can't get your email I will give you my address here and when I get the lites and bill I will send you a check. I appreciate what your doing for me and if there is something down the line you need and I can help call on me. Thanks, DonL
Nice of you to light up the world one wood turner at a time! I also think you should just buy an IKEA and be done with it. We poor souls in Canada have to pay a 50% premium. Maybe you can get a truck load drive up to Toronto and sell them at the turning club meetings. Since you will be in town I will pick up the tab for dinner.