Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

How would you cut this?

Posts

How would you cut this?

#1

How would you cut this?

Ted Evans

Please allow me to take advantage of all the great talent in this group and ask for your suggestions on how you would cut this piece to take the most advantage of the wood. Bowls, HFs, vases, firewood? It is 3 to 4 �� thick and 24 x 39� width and length.

Your suggestions and ideas would be greatly appreciated.






I know this is very subjective however, I respect your opinions more than mine for this. Thanks. Ted

Re: How would you cut this?

#2

Re: How would you cut this?

John Veerkamp

Ted,

that's some gorgeous wood. FWIW I'd get as many bigger bowl blanks from it, I see at least three, and the rest could be smaller bowls and boxes. Even some of the outside scrap could become bottle stoppers and ornaments. My opinion as I like my bowls to show off the grain and figure.

John

Re: How would you cut this?

#3

Re: How would you cut this?

Colin

What about making one of Terry's large pieces out of the whole thing? ;)

Re: How would you cut this?

#4

Re: How would you cut this?

Terry Scott

Yep Id make one piece with 27 over lapping bowls

Maybe not a most would be end grain

Make good tubes if its still wet

Re: How would you cut this?

#5

Steven Antonucci

depends on what you make?

steven antonucci

It definitely needs to be sectioned- I'd suggest smaller than three pieces to optimize the grain. Remember it's endgrain, so you have to design projects that take this into account.

My guess is that you probably have a bunch of box material...

S

Re: How would you cut this?

#6

Re: depends on what you make?

Ted Evans

Thanks to all for your ideas and suggestions.

John V., was able to get a number of bowls and some small HF�s, as well as some pen blanks and bottle stopper size pieces.

Colin, sure, you bet, in another life perhaps. I�m pleased when I finish a small simple vessel. :D

Terry, if I had your talent, perhaps I would be dumb enough to try such a feat, unfortunately, I do not have your talent and I am not quite that dumb. :\

Steve, I realize that it is not the norm, however, I intend to try a couple of end grain bowls and there are a number of smaller HF�s. Ted