Costa-Hoffman-Meeks
Mike Foster
I have recently been exploring the intersection of math and sculpture. One of the really cool things that I have found is the class of math objects called minimal surfaces. These are surfaces that describe the least amount of surface area that will connect a circumscribed area. Soap bubbles will form a surface with the least amount of surface area with a given boundary. Bubbles have no boundary, so form the least amount of surface area for a given volume, a sphere. A loop of wire will result in a flat disc, bend the loop and the bubble will join the area in a smooth curve that minimizes the amount of film. More complicated structures can be made by creating bubbles from two or more loops of wire with a film joining the two (called a catenoid). This is a fairly complicated surface that joins 3 discs (or loops of wire) but has holes that perforate and join the surfaces. This was described by 3 mathematicians, Costa, Hoffman and Meeks (hence the title). I have no understanding of the math that underlies the form, but I do know that computing power is really essential carry it out.
I found the form irresistible and decided to try to create it out on the lathe. While carrying it out, I found it more and more satisfying as I carved the joining holes. I really did not expect that I could do it. This model has 3 perforations from each side, making 6 total. This can be varied from 2 on each side up to as many as you care. The holes get smaller as the number increases. The wall thickness for the entire piece is about 1/8� including the perforations. It really astounded me as I was carving the holes to size that I could really pull it off.
This form not is cool not only in how the holes perforate the discs and compliment each other so perfectly that I could get a consistent wall thickness, but instead of having 6 surfaces, it only really has 2. I debated whether or not to accentuate this, but it seemed to call for it. All I did was bleach one surface, and leave the other natural.
I really agonized on how to display the piece. It is really a piece that calls for interaction and moving it around to see it from all sides. This stand is an initial stab at it. I considered a motorized revolving mount, but rejected that. I wonder about suspending it from above. Anyone have a better idea?
I'm afraid that pictures really can't capture the piece, as it begs for closer inspection and interaction.
Bubinga 9�d x 6�h. Maple pedestal.




