Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

First Club Demo

Posts

First Club Demo

#1

George Taylor

First Club Demo

George Taylor

Last Thursday I gave my first club demo; I turned and finished a wine stopper for the group. I believe it went well, except for the heckling when I almost fell trying to lean around the equipment to plug in the lathe's electrical cord. :)

Being a relatively new member to the club (just a year since the move), it was a little intimidating. I made sure Ruth and her web site got a few mentions ... :D

George


Re: First Club Demo

#2

Re: First Club Demo

Bill Grumbine (Kutztown PA)

Congratulations George! This may be the first of many for you. There will always be hecklers. When you gain some experience demoing, you can heckle back from the lathe while you demo. I warn people at the beginning of my demos that they are welcome to heckle, but I heckle back. It rarely stops anyone, but it is a lot of fun. :D

Re: First Club Demo

#3

Re: First Club Demo

Cyril Griesbach

Good for you, George. There are a lot of nerves working on ones first demo but the photo shows that you handled it well and that you were well prepared. It also looks as though you enjoyed it, all of which will help to guide you smoothly the next time you give a demo.

Re: First Club Demo

#4

Peter Charles Fagg (UK)

Re: First Club Demo

Peter Charles Fagg (UK)

Congratulations, I can remember vividly my first demo and how pleasurable it was when I had finished!

It can only improve from here on in and hopefully you will find that other clubs will be beating a path to your door!

Again, well done, there are too few people willing to give a demo these days!

Regards, Peter.

Re: First Club Demo

#5

Re: First Club Demo

john lucas

I still remember my first demo. The newby's probably learned something but it had to be painful for the long time turners to sit through. I turned a bowl from Walnut and it was dry and very hard. I couldn't take big cuts and quite frankly didn't even know how to make big cuts back then. However it gave me the desire to learn to do it better.

Re: First Club Demo

#6

Re: First Club Demo

Jennifer Indy.USA

George, I'm sure you did a great job. The more you do it the more you'll love it! I still get some butterflies every time though. Congrats on your first demo!

Jen

Re: First Club Demo

#7

Re: First Club Demo

Terry Scott

The first is the hardest ,do as many as you can in as short a time as you can confidence grows with each demo

You are still smiling at the end so things must have gone well

Re: First Club Demo

#8

Mike Stafford

Re: First Club Demo

Mike Stafford

Way to go George. Doing a demonstration is not for everyone. I admire those that can do it expertly.

It is far easier for me to teach than it is for me to stand in front of a group and demonstrate. I know it seems that the two things should be related but I am so accustomed to working alone and working quickly that when I demonstrate I tend to get nervous and forget to teach. After all that is the purpose of the demo.

Re: First Club Demo

#9

George Taylor

Thanks

George Taylor

Thanks for the nice sentiments.

George