Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Face Shield Cleaning

Posts

Face Shield Cleaning

#1

Face Shield Cleaning

Peter Hyde

Did a search for products to clean and polish my really beat up face shield (yes I'm super frugal 8) )

Saw one that included carnuba and other waxes to afford protection against misting and scratches and on went the light as they say.

So out came the Beal system and now I have a super clean see through scratch-less face shield again.

Be careful not to catch an edge if you give it a try.

Re: Face Shield Cleaning

#2

So what polish did the job?

JamieDonaldson

Re: Face Shield Cleaning

#3

Don Pencil

"PL" was made for this.

Don Pencil

Re: Face Shield Cleaning

#4

Re: Face Shield Cleaning

Peter Hyde

Sorry for any confusion I failed to mention I used the standard polishes that are included in the Beal system. The rouge gets rid of the worst scratches and then the white diamond polishes out the rouge marks and I finished off with the carnuba to see if it helps protect from further scratching and helps with de-misting. So far so good. It's important to remove any residue left between the polishes with a clean soft rag before going on to the next step.

Re: Face Shield Cleaning

#5

Re: Face Shield Cleaning

Lynn Taylor

Thanks for the info--I have a face shield I will try this on.

Re: Face Shield Cleaning

#6

Re: Face Shield Cleaning

Don at Central Illinois

Me, too! Mine is getting a little 'on in years' and I'm not frugal, I'm cheap. I'll try it tonight.