Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Where has the Sumo glue gone??

Posts

Where has the Sumo glue gone??

#1

Where has the Sumo glue gone??

Philip Duffy

Went to both big box stores in my area and found no replenishment of my favorite poly-glue, for pens, for outside wood, etc. "No longer carried" was the answer at both stores. Anyone know the answer? Philip

Re: Where has the Sumo glue gone??

#2

Re: Where has the Sumo glue gone??

Bill Jacksonville, NC

I found out polyurethane glue not great at gap filling and not really water proof over at IAP and other sites. I stopped using it because stuff got hard on me without much time after opening. I switch to 5-minute epoxy.

Re: Where has the Sumo glue gone??

#3

Steve Kubien

Re: Where has the Sumo glue gone??

Steve Kubien

Phillip, why not use another poly-glue? I use Gorilla Glue and love it.

Bill, that's really strange. I've got Gorilla Glue which is 2 years old, opened and just fine. I wonder if the users didn't cap it tight and they are in humid environments? Just a thought.

Re: Where has the Sumo glue gone??

#4

Re: Where has the Sumo glue gone??

Philip Duffy

Bill, I already considered epoxy. Thanks anyway.

Re: Where has the Sumo glue gone??

#5

Re: Where has the Sumo glue gone??

David Walser

Sumo Glue was made by Loctite. I just checked their website and it's no longer listed among their products. So, if you want a polyurethane glue, you'll need to find another brand.

Re: Where has the Sumo glue gone??

#6

Re: Where has the Sumo glue gone??

Bill Jacksonville, NC

Annual average relative humidity runs about 85% am & 57% pm here. Never had a problem using polyurethane glue other than hardening in bottle. Never had a pen tube self eject. Did I fail to close the bottle top? I didn�t think so, but strong possibility.

Had glue failures with medium CA glue, so switched to poly-glue for gap filling properties. Come to find out that foam created during drying not really that strong. Again never had a problem, other than hardening in the bottle.

Switched to epoxy and other than waiting an hour or two for 5-minute stuff, and 24 hours for slow stuff only complaint is messier than either CA or poly-glue for me!

One of the articles read: sorry for not providing entire link but normally post gets rejected when do!

WHICH GLUE I S THE STRONGEST?

titebond.com/Download/pdf/HowStrongisYourGlue_FWW.pdf

Re: Where has the Sumo glue gone??

#7

link  *LINK*

Ralph Lindberg


here

Re: Where has the Sumo glue gone??

#8

Re: Where has the Sumo glue gone??

Ralph Lindberg

The article is a reprint of a piece done in Fine Wood Working

I know, I stopped using expanding poly glues for flat work when I read this piece, and went back to PVA