Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

more options for seated woodworkers *LINK*

Posts

Re: more options for seated woodworkers *LINK*

#2

link didn't work. here it is  *LINK*

john lucas


http://www.general.ca/site_access/access_en.html

Re: more options for seated woodworkers *LINK*

#3

Re: link didn't work. here it is

OB OBrien

I looked at the Access lathe on the General site and don't see anything to help a sitting woodturner any more than any other lathe on the market. I turn sitting down and am very interested in such a machine.

This one doesn't fit.

OB

Re: more options for seated woodworkers *LINK*

#4

Steve Kubien

Re: link didn't work. here it is

Steve Kubien

The only thing I see is the spindle height. Isn't 39" kinda low? I mean lower than normal? I could be very mistaken on this.

Re: more options for seated woodworkers *LINK*

#5

Re: link didn't work. here it is

john lopez

Steve,

39 is low.

I turn from a sitting position and my center is at 45 inches but that is just me.

OB,

it looks like there is clearance under the bed for a user's legs.

As you know many lathes don't allow for that .

I think any lathe manufacturer that markets a more accessible machine is noteworthy.

I found a recent addition to the Vicmarc line too.

http://www.vicmarc.com/default.asp?contentID=718

John thanks for posting the correct URL .

I tested it last night and tried to edit but was stricken with password amnesia

and could not correct it.

Apologies to all for wasting your time with that.

John

Re: more options for seated woodworkers *LINK*

#6

Another solution

OB OBrien

Yeah John. That Vicmark is an advantage. A lowered lathe with it open under the ways is also a help. I have just cut off the stand and lowered the stand for a Jet mini and it works fine. Can't get my legs under it but sort of sit sideways. I do the same when using standard size lathes. Used to take a stool with me when doing demos at clubs away from my shop. Going to get back into doing that again as I really enjoyed showing folks different tricks and tips.

Cya

OB

Re: more options for seated woodworkers *LINK*

#7

Re: Another solution

John Lucas

OB I built a stand for a wheelchair bound student many years ago. It was designed for a mine lathe. It was basically a 1x12 bolted to 2 stands and we tilted it forward just a little so when he slid under it the lathe was in a more comfortable position. It was still higher than we liked but couldn't get it lower due the height of the wheels on his chair. The angle did make it more comfortable to use the gouges.