Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

New Hunter tool videos *LINK*

Posts

New Hunter tool videos *LINK*

#1

New Hunter tool videos *LINK*

John Lucas

I'm having to learn to do videos at work and they got me the new Ilife movie program for my computer. It is far better than pinnacle that I tried to use last year. I've made 3 videos of the Hunter tools in action. These are far clearer than the first one. Hope you like them. I'm still learning all the editing and of course need to find a better actor to play my part. Possible Mel Brooks. Let me know what you think. I have a lot to learn about this medium. Check out the other 2 as well. If I did the tags right they should come up when you put in Hunter woodturning tools. I'm going to try and get rid of the old one later tonight. I couldn't do it from this computer for some reason.


http://www.youtube.com/watch?v=FFW5ODChWkI

Re: New Hunter tool videos *LINK*

#2

Re: New Hunter tool videos

Jeff Myroup

Well done John, very informative

Re: New Hunter tool videos *LINK*

#3

Leo Cuellar

Very cagey...

Leo Cuellar

Nice work, John. Great way to show what is going on inside the vessel. The only constructive criticism I can offer is that the audio on the hook tools video was a bit "pop-py"... perhaps setting your microphone a little farther back or adding a thicker baffle to it would help.

Not sure I'm convinced enough to buy one of those yet, perhaps a better closeup of the surface might be in order. The directions on technique were quite informative and clear. Thank you for sharing!

Re: New Hunter tool videos *LINK*

#4

Re: Very cagey...

john lucas

Leo One of the things I have yet to achieve is showing the quality of surface in a photo or video. Because size is such an important factor in viewing surface quality it's just very difficult to see when you can't tell the size. It's different when it really smooth like a piece sanded to 1200 grit but even then it looks vastly different to your eyes when held in your hand.

I will try to see if I can do a short video on the finish left by different tools. I don't really think it's possible but won't know til I try it.

Re: New Hunter tool videos *LINK*

#5

another video  *LINK*

john lucas


http://www.youtube.com/watch?v=0v7-HMuCvvM

Re: New Hunter tool videos *LINK*

#6

The last one  *LINK*

john lucas


http://www.youtube.com/watch?v=nfp2kvhH6Mo

Re: New Hunter tool videos *LINK*

#7

Re: New Hunter tool videos

Bill Clark

Great video John. The holes in your vessel really helped show the tools in action. I just bought a Hunter #5 to do the end grain on the bottoms of some calabash shaped containers I'm working on. The Hunter worked very well and was very easy to control. I think do I got a smoother cut with one of my Thompson deep fingernail gouges on the sides with a pull cut but for the bottoms and transition area the Hunter was the best.

Re: New Hunter tool videos *LINK*

#8

Re: New Hunter tool videos

john lucas

Bill try the #1 back cutting tool. Angled and pulled back with the grain it cuts like a ring tool or hook tool and leaves a very clean cut. Using the Hunter tools as scrapers on the side of the vessels is OK but not as clean as a cutting tool.

Re: New Hunter tool videos *LINK*

#9

Re: New Hunter tool videos

Bill Clark

Thanks for the tip John. I don't have that tool now but will keep it in mind. I really do like the #5 for the end grain and transition. I was amazed how controllable it was to use. If the other is as easy to use it will be a real gem.

Re: New Hunter tool videos *LINK*

#10

Steven Antonucci

Use the embed code, John

steven antonucci

If you look on Youtube, you'll see a button that says "embed". If you click it, it gives you the code that you need to cut and paste into this window to do this:


This keeps another window from popping open and me surfing Youtube for turning videos for the next 4 hours...

Steve

Re: New Hunter tool videos *LINK*

#11

Re: Use the embed code, John

john lucas

Steve not sure what you just did. Are you saying I can imbed the link to the other videos in that video? As I've said before I not computer literate at all.

Re: New Hunter tool videos *LINK*

#12

Leo Cuellar

Re: Very cagey...

Leo Cuellar

You are right, John. That is a difficult thing to show, but a clear image that shows the grain of the wood should provide enough scale to put things in perspective, for most turners anyway. Especially on the pieces that you were working on. It would be extremely difficult at the level of your magnificent mini-goblets!

I saw the older version of that video that you posted, and your computer skills are coming right along! Keep it up, it's always good stuff when you show us what you're cookin' up.

Re: New Hunter tool videos *LINK*

#13

Re: another video

Vince Welch

Nice work John!!

Re: New Hunter tool videos *LINK*

#14

Re: another (Great )video

Galen Vetterick

Great video John!

You make it look easy but I know for me it would be practice, practice.

Are all the cutters positioned inside on the 90 degree (on centerline)? If I heard right the taper hook tool you are dropping below 90 degree (below centerline).

A little hard to tell with video shots looking down and no shot looking in over the tool rest. Might help insure to me where the cutter is.

Now I just need to earmark these so I can return to them again.

Re: New Hunter tool videos *LINK*

#15

Re: another (Great )video

john lucas

The tapered hook tool is grabby if you keep it parallel to the lathe bed. I find it more controllable if you tilt it down slightly. I recommend turning a closed bowl shape with it before hollowing a vessel. This will let you look in and see what your doing so you can play with different angles. This tool has a little learning curve to it. The others are more natural because your either rubbing the bevel or scraping. This one is sort of in between.

Re: New Hunter tool videos *LINK*

#16

Steven Antonucci

What the embed code does.

steven antonucci

When you click on your link, it opens another window out to Youtube to your video.

If you click on the "Embed" button after you upload the video, it gives you the HTML code you need for your video to appear in the post for WoodCentral. If you look at my post with your video in it, it actually appears in the WoodCentral window and nothing else pops up.

The embed button is right under your video window on Youtube.

S

Re: New Hunter tool videos *LINK*

#17

Re: New Hunter tool videos

Grant Wilkinson

Excellent videos, John. I've had the 5 for a while now and love it. I use it on acrylic pens, too. When I've saved enough pennies, I would love to get the bent shaft models.

The only question that I have is how to you cut those slots in the vessel so that you can see what you are doing, and how do you fill them in later? I would do much better if I could see what I'm doing. :-) :-)

Re: New Hunter tool videos *LINK*

#18

I used X-ray glasses   

John Lucas

Re: New Hunter tool videos *LINK*

#19

Dick Hines

Re: I used X-ray glasses 

Dick Hines

Great idea to start with holes in the side of your hollow form. Some of mine end up with holes in the side. If I started with the holes I could save time cutting through the sides.

Re: New Hunter tool videos *LINK*

#20

Re:Good job John, and you now have.....

JamieDonaldson

...more new camera toys to play with! Since many hollowing "accidents" happen when inserting or removing tools thru the small top hole, I often recommend turning the lathe off when when performing those tasks. Of course that almost requires a remote switch, and many lathes lack that feature. :\