Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Fisch mini lathe

Posts

Fisch mini lathe

#1

Fisch mini lathe

Roger Jessup

I have a friend who has a 10" Fisch model TC90-100 mini lathe. Recently the belt broke. Since Fisch is no longer in business I was wondering if anyone knows of a source for a belt. Any help will be greatly appreciated

Re: Fisch mini lathe

#2

Rob Wallace

Re: Fisch mini lathe

Rob Wallace

I highly recommend the following vendor for replacement belts:

http://www.beltsforanything.com/site6.php

Telephone: (337)235-9736

Excellent service, friendly and helpful, with quick shipping. I recently bought replacement belts for all of my lathes to have on hand - I actually arranged a group order from our turners club so everyone could have spare belts in inventory for their lathe if they wanted to. The Belt Store was excellent about the whole order, and gave us a discounted price if purchasing above a certain number of belts. Superior service, by any criterion.

You will need belt specs such as overall length, section type (A, B, etc., or get the width, in inches of the wider (outer) width of the belt if it's a V-belt, and they can help you on the phone. If a poly-V belt type, you'll need the the dimensions of belt width and length, and number of ribs (for small lathes it's usually a J-section poly-V). In some cases the belt has a number on it that will provide these specs; have all of this information ready when you call - they are very knowledgeable, and may already have the cross reference on their computer system for the correct belt for the machine you are trying to fit - some are even referenced by machine manufacturer and model number.

Good luck!

Rob Walalce

Re: Fisch mini lathe

#3

Re: Fisch mini lathe

Bill Turpin in WNC mountains

Unfortunately this belt is a special length. Its a J3 belt that is 25 3/8" long (outside length). It is also a Delta part #1340949 that fits an obsolete LA-200 lathe. Standard J3s are 24" 0r 26".Delta still shows it available at @ $18. Buy TWO for next time.