Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

compressors

Posts

compressors

#1

compressors

Bill Youngblood

Anybody had any experience with the Ingersol-Rand 3 H.P. 60 gallon compressor? I've been looking around and it seems to be a pretty good unit; but that's the salesman's opinion. I read on some old posts that the 5 H.P. unit was not too good. I just don't want to waste any more money than I already have on a crappy compressor.

Re: compressors

#2

Re: compressors

Terry Gerros

I do not have any knowledge about this particular compressor, however I did purchase a 60 gal, 5 hp compressor from Harbor Freight (U.S. General) last January....I know, I know, but it was on sale PLUS I had the 20% off coupon which brought the price down to 600.00...I thought that was a screaming deal. Anyway, so far so good. I looked Ingersol Rand and a few other American made ones before making a choice. As a hobbyist, price won out. So far though, I am very pleased with the compressor.

If you don't have a coupon, type in 20% discount coupon Harbor Freight into yahoo and it will find it for you. Print one out and there you go.

Terry

Re: compressors

#3

Re: compressors

Mark Mandell - Gone Round In Jersey

I've had the 3 hp I-R "SS3L3" in service for about 7 years. I run only synthetic oil and put an automatic valve on the tank drain. I use air for garage tools, a hyper speed carver, to blow out turnings, and to drive my HVLP guns for finishing. Actually quite happy with the compressor. It doesn't make sense if you're planning on running Dynabride sanders and such. Were I to step up, I'd go with a 2-stage Quincy which have been competing closely rather than the I-R 5hp.

With the automatic condensate drain, my air, which is also piped and filter to the basement shop and the garage (where the machine is mounted), is nice and dry. Oil carryover has not shown up, but would be a real game changer working with waterborne finishes. Two stage compressors will have less oil carryover.

hth

Re: compressors

#4

Re: compressors

Vince Welch

Hi Bill,

I am wondering exactly what are you going to be using the compressor for? Sanding, Spraying finish, something else, all of the above? Just wondering. It is my understanding Cambell Hausman manufacture many of the units today whether it has their label on it or not. The tanks today seem to last many years. Draining out any condesation buildup really help with longivity of the unit. I do not have many particulars concerning the motor other than the obvious such as keeping the oil full and changed when needed. I can say that for sanding applications you need at least a 60 gallon unit. ALso sanding with a pnuematic air unit is best with the higher grits such as 220 and above. It helps to have the torque of a rotory action drill for those lower grits. Hope this helps, Vince

Re: compressors

#5

Re: compressors

Jerry Klug

I have the 5 HP I-R 60 gal upright with the T-30 pump (2 stage). It is an American made workhorse with a Baldor motor and a Manchester tank (painted grey). I considered the 80 gal but went with the 60 for the $300 savings. The less expensive I-R tanks are painted a creamy yellow and are made usually in Mexaco. These tanks are made to the ABSOLUTE ASME Code minimum thickness where the American made tanks are designed to a Code thickness and then rounded up to the usual industrial plate thicknesses. This gives a stronger tank and has some corrosion allowance built in. I would check the build tag on any tank whether HF, Campbell Hausfield, Speed Aire, etc to see where the tank is manufactured and what the shell thickness is listed as. This is a good comparison of quality.

My T-30 I-R runs on synthetic oil and I have had absolutely no problems. I really like the quiet running of a 2 stage.

I had a Speed Aire single stage 60 gal before and blew head bolts and gaskets. Boy did that compressor get warm (and it was noisy).

I retired from being an Oregon State pressure vessel inspector so I have a lot of concern about the thickness of the steel holding compressed air. Like most mechanical equipment, you get what you pay for.

Re: compressors

#6

Re: compressors

Bill Youngblood

Thanks for the comebacks, Guys. I love this forum. You can always depend on help. :)

I now have a small C-H unit. It is noisy so I keep it outside my shop area in my barn. The most aggravating thing is in the winter. It won't start in the morning with any pressure in the tank . I have to COMPLETELY drain the system and tank and wait for it to start from scratch. A real pain when it is 0 degrees. My biggest air user is my piercing tool which uses about 3.5 CFM and my unit only produces about 4.5 so it is on more than it's off. I'm thinking about getting a random orbit sander so, as Tim the toolman would say, "I definately need more power".

Thanks again for the input.

Bill

Re: compressors

#7

Re: compressors

John Lucas

I have the same compressor at TErry. It's been decent. I had to replace the main switch which was quite expensive. It did run for about 3 to5 years before it needed that switch.

It's fine for devices that don't use a lot of air. If they do then you can't use it for very long. I bought a Grex orbital sander and it simply won't run it long enough to sand a bowl. If I sand a little and give it a break it works but I usually only use it for small projects.

It's been fine for spraying, cleaning out hollow vessels, running air drills, and air saws (but not too long).

I simply couldn't afford a better unit at the time and it's gotten me by. I do have a large dual stage unit now but it's sitting on my back porch because I need to run a new 220 line to the shop to be able to handle that and the used welder I purchased. Just haven't had the time and money at the same time.

Re: compressors

#8

Re: compressors

Tommy Holmes in NW FL

I've have had this IR compressor for two years and have been very happy with it. I use it for sanding, piercing and blowing out hollow forms. It does seem to cycle pretty regularly with the NSK while piercing and not so often with a pneumatic sander (HF). Maybe because I run the piercer for longer at one time. It is fairly loud but not any louder than I expected. Got it at Northern Tool with free shipping.

Re: compressors

#9

Re: compressors

Barry

No experience with that particular compressor, but allow me to comment. About 3 years ago, I was in the market for a new compressor. I bought a Home Depot "Husky" compressor. It is a single stage with a 60-gallon upright tank. The horsepower is rated at 6 or 7 HP, I can't remember which, but the rating is probably over rated. The compressor itself is cast iron and it provides all the air I need in my woodturning shop. Because of the lage tank, the compressor only kicks on a couple of times a day.