Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

jet 1442 rpms

Posts

jet 1442 rpms

#1

jet  1442  rpms

ed hoxter

is it possiable to slow the speed down on a jet 1442 vs ?? if so how ?? ed

Re: jet 1442 rpms

#2

Tim Boger

Re: jet  1442  rpms

Tim Boger

I have the same lathe and removed the speed setting dial / handle and drilled another hole for the locking pin to engage when the dial is turned to encourage a lower RPM setting .... other that a slight mis-alignment of the hole (my fault) the plan worked well.

I'm interested to read what others here suggest.

Re: jet 1442 rpms

#3

Re: jet  1442  rpms

John Altberg

I made the same modification on mine, including the misaligned drilling! Nothing a second hole couldn't fix.