Muddler's Finish
Dave Gelnett
What type of finish do you put on a muddler? I am assuming none, just use a hardwood and sand smooth. Does that sound correct?
Thanks
Knowledge You Can Build On — Est. 1998
Muddler's Finish
Dave Gelnett
What type of finish do you put on a muddler? I am assuming none, just use a hardwood and sand smooth. Does that sound correct?
Thanks
Re: Muddler's Finish
Jason Nemec
I would oil it with Tung oil to bring out some color and flood the end grain to reduce the amount of beverage it sucks up.
Just make sure it's pure Tung oil with no driers or additives.
-jn-
Re:All my utility items are finished....
JamieDonaldson
...with a coat of mineral oil, one of the most food safe finishes available. I've made and used muddlers for many years, and good maple or cherry will hold up just fine with frequent use, and if they become dry from repeated washing, just wipe on a fresh coat of mineral oil.
Re:All my utility items are finished....
Jim Rutten
For those of you with a protected upbringing like me here is the definition:
A muddler is a bartender's tool, used like a pestle to mash -- or muddle -- fruits, herbs, and/or spices in the bottom of a glass to release their flavor.
Re: Muddler's Finish
John Veerkamp
I use Mike Mahoney's heat treated walnut oil.
Re:Jim- you can't make a good.....
JamieDonaldson
...mint julip withour "mushing" mint leaves and sugar in a julip cup.
What's the best shape/size for a muddler? *LINK*
Ellis Walentine
It's amazing to me that I've never made a muddler. I use an old wooden pestle, but the shape of the end is kind of half round, which does an inefficient job on mint and orange slices. I'd think that an almost-flat shape would be best, and large enough that you don't waste too much time getting the job done.
Anyone want to post some pictures of muddling devices? Or any other kitchen woodenware, for that matter? I'd like to update the Gift Gallery with some new ideas.
Ellis
Gift Gallery
Re: Here is my standard shape....
JamieDonaldson
...for muddlers. The "mushing" face does need to be somewhat flat, then a rolled edge in order to reach into the bottom contours of a glass. And "mushing" is a highly technical term! 
Thanks, Jamie
Ellis Walentine
I've added your photo to our Gift Gallery. Good little gift item. Can't wait to make a few.
Ellis