Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

John Jordan "inspired"

Posts

John Jordan "inspired"

#1

John Jordan "inspired"

Mike Foster

I thought I would post a couple pictures of this piece for comment. I almost said "John Jordan copy", but we had that discussion here before. I attended the Hartford symposium, and sat in on one of John's demo's. I've always admired the pieces that John turns out, and decided that I had to try my hand at one. I have done a lot of spiral type pieces, but there is not much original in this one. Really a blatant copy of John's style. I was really doing it for the learning experience of the carving, and especially the texture. This is the first piece that I tried out the hammer effect (I used my Ryobi carver). I really like the outcome, and will probably use it (the texture) in some of my pieces in the future.

Now, I would not put this up against John's work. I used a chunk of hard maple that I had, and did the best I could to orient it to good effect, but it really pales in comparison to what John does. I think he spends a lot of time getting the right blank, and getting the most out of it. He also has years of experience over me in producing a nice texture. I really enjoyed listening to him and got enough inspiration from the demo that I had to give it a try.

I don't anticipate doing more copies of his style as I have a number of my own ideas for work in the pipeline, but I might use elements of what I learned doing this piece. Thought posting pics of the piece might spark a little dialogue, so fire away. FWIW, I would say this is close to outright plagiarism, but I give all credit to John.


Re: John Jordan "inspired"

#2

Re: John Jordan "inspired"

john lucas

Mike Excellent job. I've seen a lot of copies of John's work. At first you think is that his. Then you look closer and you can just tell. The grain and figure in the wood just isn't the same. There shapes are excellent and of course the orientation of the grain and color is superb. That doesn't take anything away from yours. You did a superb job of carving and shaping. Now comes the fun part. Trying to add your own spin on it.

Re: John Jordan "inspired"

#3

Leo Cuellar

Re: John Jordan "inspired"

Leo Cuellar

Nice piece of work. Nothing wrong with paying tribute to someone else's style. Looks like it was fun, but a little difficult to make. The spirals flow well & the texture looks good.

Re: John Jordan "inspired"

#4

Re: John Jordan "inspired"

Don Orr

Great work Mike. JJ is an inspiration to a lot of us.

Re: John Jordan "inspired"

#5

You should Be Proud!

George Guadiane

I LOVE this piece!

Well done.

Mr Jordan should be proud of his ability to teach and you should be proud as a high performing student.

Re: John Jordan "inspired"

#6

Thanks

Mike Foster

Just got back from the first day of a 3 day craft show. Doing pretty well so far.

I appreciate all the nice comments. I kind of thought this piece might generate some controversy/discussion. Maybe I am just slow and one of the last turners to try a JJ styled piece.

Re: John Jordan "inspired"

#7

Re: Thanks

John Jordan

Nicely done, Mike. Everything you learn goes into your "pocket" that Clay talks about. When you get a lot of stuff in it and dig around in there, what comes out is yours.

The bottom of that piece rocks. :) I love the bottoms on most of my pieces, too-usually a little carved texture, but I have never done one like that. We should have a contest or show and tell of the bottoms of pieces.

John

Re: John Jordan "inspired"

#8

Re: Thanks

Mike Foster

Thanks John. I appreciate it all the more since it is you that I was emulating and one of real masters of woodturning.

Mike

Re: John Jordan "inspired"

#9

Keith Tompkins

Re: John Jordan "inspired"

Keith Tompkins

HI MIke, Well Done! Yes, the bottom is very cool, continuing the theme perfectly.