Maytag Repairman, was that Chip or Dale? OT
Dick Coers
Here's one for the appliance repair Hall of Fame! First, I was raised on a farm, and calling a repairman is considered an absolute last resort. So in I go.
I started to run a load of laundry tonight, and see a fine coating of dust all over the inside of the drum. HUH? I ask the wife what the heck was the last thing she dried. Just regular stuff. So I wipe it down and think I should run it for a while to clean it. I check outside for airflow, all is well............Then I get back in the basement and was that a clunk? Dang, the dryer stops. All the motor will do is hum. So I move out some stuff, pull off the top, pull off this tiny panel in the back, and find the motor is locked up. How am I going to pull that motor out? The front is hooked into the blower. So I wiggle around on the shaft and it starts to move a little. Then more and more. Now it's free!!!! Think a chunk of lint wedged in there? So I get the Fein vac and shove the hose into the duct. A push sends it around a 90 and thunk, I've got that lint. I pull the hose back and, WHAT THE HELL, IT'S A RAT!!!!! Nope, it's a fresh dead chipmunk with a chunk of fur peeled back. Pour little feller, I bet he kept up with that fan for a little while.........Another repair victory for the cheap guy! 



