Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Face plates nearly free to a good home

Posts

Face plates nearly free to a good home

#1

Face plates nearly free to a good home

Barry Irby

I have two faceplates that are about 3 or 3 1/2" in diameter. They are homemade and are for a 1" by 8TPI shaft. Anybody want them? Make a $10 or more donation to Wood Central and I will send them to you.

The one with the nut on it is threaded in the center hole will accept a 3/8" bolt, perhaps a hanger bolt.

Re: Face plates nearly free to a good home

#2

Re: Face plates nearly free to a good home

bernie feinerman

How do I go about making the donation?

Bernie in Fairhaven, Ma

Re: Face plates nearly free to a good home

#3

Re: Face plates nearly free to a good home

Barry Irby

Go to Odds and Ends (upper left) and at the bottom of the list is Support Wood Central. Do whatever, mail Ellis a check, use PayPal, whatever.

Send me an E-mail with your address and I will mail you the faceplates.

Do note that the smaller one is completely round. Has not flats on it for a wrench. I used a big pair of pliers or a pipe wrench. If you use it for large objects, you can use the object to give the leverage to remove it. Of a machinist could put some flats on it for you.

Re: Face plates nearly free to a good home

#4

Re: Face plates nearly free to a good home

bernie feinerman

Hello Barry,

I posted a Paypal of $12/year to WC (it is a great forum) but I do not know how to access your email.

You can contact me at feinerman@comcast.net

Bernie

Re: Face plates nearly free to a good home

#5

On the way....

Barry Irby

Dropped them in the mail earlier today in one of the little flat rate boxes. They are crude but effective, hope you are not disappoint.