Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Juried into the League of NH Craftsmen *LINK*

Posts

Juried into the League of NH Craftsmen *LINK*

#1

Juried into the League of NH Craftsmen *LINK*

Donna Banfield

On Thursday afternoon, I successfully juried into the League of NH Craftsmen. For those who are unfamiliar with this organization, here's a link to their website.

http://www.nhcrafts.org/

Below is a photo of one of the pieces that was presented for examination during my jury session. It is a Pin Cherry vessel, turned as an entire log on the lathe. After turning and hollowing I held the piece with a carving mount held in the banjo, and while the piece was rotated 90 deg. (or on it's side) I used a jig saw to cut the leaf pattern that I drew with a charcoal pencil. Then I used an arbortech with an industrial carbide cutter to rough out the undulating curves of the leaves. The remainder of the carving was done with hand tools and a Weecher Power carver. The final dimensions of this piece are 9" high x 9" wide (at the top) x 2" wide (at the base).


Was this a lot of work? Yes; roughly 6 weeks, 5-6 hours a day, 7 days a week. Will I do it again? Absolutely! Learned a few things while doing this; the next one won't take quite as long. I did burn up my power carver in the process, so I am looking to replace it, and am asking for opinions on the power carvers out there. My next one will need to be a heavier duty than the Weecher, and that class of carvers, because this type of work is where I see my future headed.

Critiques and comments appreciated.


http://www.nhcrafts.org/

Re: Juried into the League of NH Craftsmen *LINK*

#2

Keith Tompkins

Re: Juried into the League of NH Craftsmen

Keith Tompkins

HI Donna, That is awesome! A well deserved honor...you should be proud! BTW, anyone not familiar with League, this is not an easy accomplishment.

Re: Juried into the League of NH Craftsmen *LINK*

#3

Jim in Burlington Ont.

Re: Juried into the League of NH Craftsmen

Jim in River Oaks, Ont.

Congratulation Donna,

I really like this piece, the carved character of the shape gives it so much life...love the colouring as well.

Take care,

Jim

Re: Juried into the League of NH Craftsmen *LINK*

#4

Re: Juried into the League of NH Craftsmen

john lucas

Wonderful piece. You should get in higher end shows with work like that. If the photography is a problem let me know. I've been pretty successful helping people get into the higher end shows. Your photo is pretty good but it could be better.

I would go with the Foredom. I have a Weehcer, a Foredom and an older model no name. I don't have the high end foredom but it blows the others away in how smooth it runs and the how much power it has. I don't have any experience with the ones from Woodworkers supply however they do sell a cable that attaches to big motors. My friend Komli has one and does extensive carving on all of his bowls. It will hog out anything. I think he hooked it up to an old 3/4 horse motor from his old lathe.

Re: Juried into the League of NH Craftsmen *LINK*

#5

Re: Juried into the League of NH Craftsmen

Carole Valentine

Congrats, Donna. Lovely piece! I use a Weecheer too, but mine is a heavy duty 1/3 hp and the only thing I have had to do to it so far is replace the inner shaft (knock on wood). The 1/3 hp ones are sort of hard to find. I got mine at Traditional Woodworker - seems to me they have the 1/3 ones made especially for them. Thought about a Foredom, but I am pretty happy with this at less than half the price. Oh and BTW, thanks to John Jordan, I discovered that the recip part of the Weecheer works a lot better if you remove the spring!

Re: Juried into the League of NH Craftsmen *LINK*

#6

Re: Juried into the League of NH Craftsmen

Chuck Engstrom

Congratulations, Donna. The NH League is a great honor; I can remember my parents seeking out members' products when we traveled to NH during my childhood 55 - 60 years ago.

--Chuck

Re: Juried into the League of NH Craftsmen *LINK*

#7

Re: Juried into the League of NH Craftsmen

Halsey

Fine piece Donna. Halsey GNHW

Re: Juried into the League of NH Craftsmen *LINK*

#8

congratulations

Mike Foster

Donna,

That is really an honor. I've often considered giving it a go, but decided that I just don't have the time to produce enough to keep the league shops stocked, and don't have the time to do the Sunapee show. That is really a great show, and everyone I have talked to seems to do well there. I live in VT, but close enough to the border that I qualify to apply for membership. Where do you live?

Great piece and a nice coup getting into the league.

Mike

Re: Juried into the League of NH Craftsmen *LINK*

#9

Re: Juried into the League of NH Craftsmen

Barry L Elder

Very nice work, Donna! A very inspiring piece! Congrats!

Re: Juried into the League of NH Craftsmen *LINK*

#10

Re: Juried into the League of NH Craftsmen

Ken George

Congratulations Donna, beautiful piece.

Re: Juried into the League of NH Craftsmen *LINK*

#11

Re: Juried into the League of NH Craftsmen

Donna Banfield

Thanks, Keith. You and your work were a positive influence on my carving turned pieces.

Re: Juried into the League of NH Craftsmen *LINK*

#12

Re: Juried into the League of NH Craftsmen

Donna Banfield

Thanks, Jim. Can't really take any credit for the color of the piece. That's the way it came out.

Re: Juried into the League of NH Craftsmen *LINK*

#13

Re: Juried into the League of NH Craftsmen

Donna Banfield

John and Carole, thanks for the help. I's still doing a lot of research on the next carver. It's like researching for the next lathe -- so many choices!!

Re: Juried into the League of NH Craftsmen *LINK*

#14

Re: Juried into the League of NH Craftsmen

Donna Banfield

Thanks Chuck.

With me, I feel like I've come full circle. I purchased many things from League artists over the years. I even bought a walnut bowl, 10 years before I started woodturning myself. And watching the woodturners demonstrating at the League's art fair at Sunappee were in part responsible for my interest in woodturning.

Re: Juried into the League of NH Craftsmen *LINK*

#15

Re: congratulations

Donna Banfield

Man, it's a small world, Mike, isn't it? I live in Derry, NH. Had no idea you lived in New England. Ever been to the NE Woodturning Symposium held at Pinkerton, every 3 years? It's a prety good Symposium, for a one day event.

Re: Juried into the League of NH Craftsmen *LINK*

#16

Re: Juried into the League of NH Craftsmen

Donna Banfield

Ken and Barry, thanks for your kind words.

Re: Juried into the League of NH Craftsmen *LINK*

#17

Keith Tompkins

Why, Thank you, Donna!

Keith Tompkins

Re: Juried into the League of NH Craftsmen *LINK*

#18

Steven Antonucci

Congrats!

steven antonucci

Re: Juried into the League of NH Craftsmen *LINK*

#19

Spence

Re: Juried into the League of NH Craftsmen

Spence

Congrats Donna!! Absolutely gorgeous!!! Definitely raises the bar for me as I've been thinking a lot of doing more carving on my turnings. This goes into my inspiration folder.

Re: Juried into the League of NH Craftsmen *LINK*

#20

Congratulations !

Don Orr

Well done and well deserved !

Beautiful work.

Re: Juried into the League of NH Craftsmen *LINK*

#21

Barb Siddiqui

Re: Juried into the League of NH Craftsmen

Barb Siddiqui

I'm playing catch-up here. Congtatulations, Donna, that is really impressive.

Re: Juried into the League of NH Craftsmen *LINK*

#22

Re: Thanks Barb :^)

Donna Banfield