Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

a few words...

Posts

a few words...

#1

a few words...

Garyg in Md

on the Hunter #5 used on dry box elder end grain with a spritz of water:

sweet

glass

amazing

...Gary

Re: a few words...

#2

Cool!

Doug Thompson near Cleveland

Re: a few words...

#3

Re: Cool!

Garyg in Md

When I bought it, I knew there had to be good reasons -- I just didn't know what they were! This one certainly has to go near the top of the list. No hook tool or Berger tool could have done a better job, if that. No white knuckles either. The only drawback I see is that to stay on bevel and complete the sweeping cut from the center all the way to the rim, you end up in a rather awkward position with the handle waaaaay out beyond the ways. It's a bit hard to control the pressure on the cut from way out there -- but still very doable. ...Gary

Re: a few words...

#4

Re: a few words...

Don Evans

Thats great Gary, NOW if I could just find some box elder, haven't been able to find any for last 5 years and it's my favorite wood as I like to turn and carve.

Any suggestion to a source please email me if so!!

Don

Re: a few words...

#5

Re: a few words...

fgvanatta

Lots of box elder available on eBay.

Frank

Re: a few words...

#6

Re: a few words...

Garyg in Md

Don, Frank is right -- you can get it on eBay. I recommend Gary at NC Wood for terrific, guaranteed service. I got this piece from a neighbor. It's only about 6" in diameter but has a beautiful red star of beetlejuice in the middle. I attended the opening of the new exhibit at the Renwick (Bressler Collection) last week and noted a fair number of box elder works in the donated pieces. So you're not the only one who likes it! ...Gary