Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Lucas inspired Mirrors

Posts

Lucas inspired Mirrors

#1

Lucas inspired Mirrors

Mike Foster

I am working to get ready for a craft show in a couple of weeks and decided some mirrors might be something that will sell. I took inspiration from John Lucas. I did not get to see John in Hartford, but he had some pretty good notes in the big book that we all got.


I liked some his more complicated designs and decided to give a go at them. I think I carried off the flower forms a little differently than John. I used a router set up to cut grooves in the blank on the lathe using indexing. I have a table that I mount in the tool rest to hold a carriage sled for the router. After doing the first one in Peruvian walnut (really nice walnut with rich color) and curly maple I got the idea to do a sunflower. The center is a button inlay turned from black palm endgrain. Pretty effective.


I had a couple of laminate glue ups left from some trials using Clarence Rannefeld's book and techniques. I decided these might be used to good effect in mirrors. The photo didn't really nail the purple heart color, but you get the idea. I am still applying finish to these. This photo was shot after they got a sealer coat of shellac and before sanding and finish coats.


Thanks for the inspiration John!

Mike

Re: Lucas inspired Mirrors

#2

Re: Lucas inspired Mirrors

john lucas

Mike Fantastic. I have made a few of the multisegmented pieces from Charle's book as well. They are fun. I've been thinking about redoing my miter jig and instead of using the wire like he does for marking the cut line I'm going to rig up my laser level.

I do make some of my flower mirrors using the router and index head. It just too easy to make them correct that way. It looks like you did some of the overlapping leaves. I like those lot but of course it takes 2 glue ups.

Re: Lucas inspired Mirrors

#3

WOW!!!!!!!

adrien Coblentz

Re: Lucas inspired Mirrors

#4

Jim in Burlington Ont.

Re: Lucas inspired Mirrors

Jim in River Oaks, Ont.

Nicely Done,

I think you have raised the bar....

Take care,

Jim

Re: Lucas inspired Mirrors

#5

Re: Lucas inspired Mirrors

fgvanatta

A truly beautiful bunch of mirrors.

Frank

Re: Lucas inspired Mirrors

#6

Re: Lucas inspired Mirrors

jimmy edwards

What is the title of Charles book and where to get it. Would love to try some of these. Thanks

Re: Lucas inspired Mirrors

#7

Laminated Designs in Wood

Doc Green

Google Clarence Rannefeld and you should find it.

A bit expensive! ~Doc

Re: Lucas inspired Mirrors

#8

Re: Lucas inspired Mirrors

Mike Foster

It is actually Clarence, not Charles. The book is titled Laminated Designs in Wood. Covers a lot more than just turning with projects for flat panels, trays and the like. A word of caution, this is rather complicated and really requires making some good jigs to do right. He describes them in the book, but they take an investment in time to construct. His process can get about as complicated as one would like to push it.

Re: Lucas inspired Mirrors

#9

Re: Lucas inspired Mirrors

Terry Scott

These will become cherished heirlooms I am sure

Beautiful work congratulations

Re: Lucas inspired Mirrors

#10

Re: Lucas inspired Mirrors

john lucas

Last time I looked it was out of print. I found one through Amazon.com. It was used but in perfect condition. Mike is right. It is a lot of work to do these. You glue and cut the segmented pieces 3 or more times. Each time any inaccuracies add up. I thought my saw was perfect but by the time I finished the first 3 or 4 sets of glue ups the board had a 1/4" bow in it from end to end. I was still able to get 2 laminates from it but should have been able to get 3. Need a better blade and even more accurate set up.

Re: Lucas inspired Mirrors

#11

Re: Lucas inspired Mirrors

jimmy edwards

thanks for the info. I just got the Stuart Mortimer book on amazom

Re: Lucas inspired Mirrors

#12

If I may ask.

Toney Robertson

What do you charge for one of these?

They are beautiful and I would think a large investment of time.

Re: Lucas inspired Mirrors

#13

Re: If I may ask.

Mike Foster

Toney,

John and I were discussing this off board by email. We both agree with you that a lot of work goes into the more complicated mirrors. Unfortunately, the reimbursement that you can expect may not match that effort. I have not tried selling any yet, but the venue that I am in (a high end craft show) could be different than the experience John has with his gallery. I am going to try selling the segmented mirrors for around $100. John agreed that the price should be at least that much, but found they don't sell for more than around 55. So, we'll see. This is a 3 day craft show for me, and I have time to drop the price if they don't seem to be moving.

Mike

Re: Lucas inspired Mirrors

#14

Re: If I may ask.

Toney Robertson

Well good luck with the show.

Let me know how it goes.

Re: Lucas inspired Mirrors

#15

Leo Cuellar

Very nice!!!

Leo Cuellar

Re: Lucas inspired Mirrors

#16

Barb Siddiqui

Just an FYI

Barb Siddiqui

That book is now out of print and is selling on amazon for $55 used, $148 and up, new. It is considered 'rare' now. There is an alternative, though perhaps not so all-inclusive to Mike's specific designs. I think it would get

a person started on laminated designs very well, and patterns could be adapted to do in the round:

'Unique Wood Laminations' by Jerry Syfert, reviewed here: http://www.woodcentral.com/books/syfert_lamination.shtml


img