Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Question for the day:

Posts

Question for the day:

#1

Steven Antonucci

Question for the day:

steven antonucci

A law is passed that woodturning is no longer legal, and being a law abiding citizen, you have to go some other route. In fact, all woodworking is now illegal and trees are protected from any type of tools... (to keep the wiseguys from saying flatwork!)

What do you do? Assume that the government isn't completely evil (no comments, please) and buys back all of your turning stuff at a fair price so you have the start-up capital to take up any hobby.

What are you going to do and why?

Steve

Re: Question for the day:

#2

This Is Just MEAN!!!

George Guadiane

But OK, here goes:

I have already done jewelry making, so because I know it, I might go back to that, on a limited basis, but if the "mean ole Government" gave me some kind of fair value for my tools, I'd probably get deep into pottery or glass blowing/making.

Both things fascinate me. Both are classic and each, through it's own techniques and embellishments allow for a wide variety of personal expression.

Re: Question for the day:

#3

Re: Question for the day:

OB OBrien

I'd become a gunsmith.

OB

Re: Question for the day:

#4

Re: Question for the day:

Bob Macgregor

I was going to say "retire with a stack of good books", but I guess books are out, too.

BOB

Re: Question for the day:

#5

Re: Question for the day:

Don at Central Illinois

Oh no, not with Barnes & Nobles Nook or Kindle. We don't need trees to make books anymore.

Re: Question for the day:

#6

Re: Question for the day:

John Lucas

I'd just spend more money on rifles, pistols and shooting. It's a great hobby and let the Government try and take those a way from me. :)

Re: Question for the day:

#7

Re: Big Bill G. may be right, and.....

JamieDonaldson

...the South will rise again!!! :D

Re: Question for the day:

#8

Another avenue other than guns...

Jorge Casta�eda

I'll take the settlement money and get a new hodad and other gear, if you don't know what that is, is the tool we were using in the seventies and eighties to plant trees.

Finally having acknowledged how valuable the trees are, the government should also be tickle pink if we go planting and a generous reward will be forthcoming, as we will be providing a valuable service that will benefit not only the locale, but the whole of mankind.

Yes, jobs and money grow on trees.

Jorge

That would be a great way to go plant a second million in my late seventies...:D

Re: Question for the day:

#9

Re: Question for the day:

Scott Hurley in N VA

Of course, you won't be able to use wood for the stocks!

Re: Question for the day:

#10

Re: Another avenue other than guns...

Stuart Johnson

Plan a move to New Zealand or Australia --- if they still allow woodturning

blacksmithing -- have wanted to try it for years

welding -- seems like it would be useful

stained glass --- did it years ago and even sold some.

Re: Question for the day:

#11

Re: Question for the day:

Reed Gray

Well, if I sold my shop, I could probably pay off my house. Then, well, I used to do leather work, but the only money I ever made from that was from making footbags for 15 years or so (known to most as Hacky Sacks which is a registered trade mark). That made me famous but not rich. I have been spending a lot more time with my guitar. Maybe it isn't too late to be a rock and roll star. But then, guitars are made with wood. Don't know if they could be made with composits for the neck and fret board. There is an aluminum body one made in Salem Oregon..... Hmm, so much to ponder.......

"Pinky, are you pondering what I am pondering?"

robo hippy

Re: Question for the day:

#12

Re: Another avenue other than guns...

Carole Valentine

Stuart, I'd move too, but neither New Zealand nor Australia would let me stay - too old, not enough money to invest or not a needed skill (they already have enough woodturners!). Probably wouldn't have me in Switzerland or Austria either. Nobody would have me unless it's some backwater where my $2.50 USD is a fortune to them! LOL

Re: Question for the day:

#13

Mike Mills

Re: Question for the day:

mike mills

$$$$$$$$ I would invent artificial wood and get rich! $$$$$$$$$$

Re: Question for the day:

#14

I'd move

Jeff Willaford

to the border with Canada. My home would be in the US and my shop would be in Canada.

Re: Question for the day:

#15

Steven Antonucci

Lots of 'non-craft' replies?

steven antonucci

Interesting to see how many folks wouldn't look at another creative outlet in another craft like ceramics, photography, or metalsmithing. All three are parts of my life with very limited attention as other things consume my free time.

I suppose that if I wasn't working with wood, I'd be working with metal, simply because you can drive around and pick through other people's garbage to source it (not unlike woodturning). Ceramics is interesting, but where would I find dirt...hmmm?

S

Re: Question for the day:

#16

Steve Kubien

Re: Question for the day:

Steve Kubien

From and art/craft point of view, probably blacksmithing and welding. Perhaps pottery.

From a what-will-I-do-with-my-time point of view...Well, I'd be more regular about hitting people with sticks while dodging swords and archery for those times when I do not feel like walking all the way to where my opponent is.

Re: Question for the day:

#17

Keith Tompkins

Re: Question for the day:

Keith Tompkins

Well, I'd write my senator or congressman, and let them know that using drugs are illegal, possessing many types of weapons is illegal, many people are in this country illegally. I think it's against the law to cheat on your taxes, or collect workman's comp. when you're not disabled as well. Fix those problems, then come see me about cutting wood illegally. Until then, our well-intentioned government can kindly kiss my @$$.

Re: Question for the day:

#18

Re: Lots of 'non-craft' replies?

john lucas

Steve I'm a hobby nut. I've done leather work and plan to build myself a custom holster shortly so I would probably still do that. I am learning Blacksmithing and metal work as well as some jewelry. Did I mention Photography. Well If I didn't have to do it for living and could actually afford the new equipment I would probably still be shooting. I would love to get back into rock climbing. Not at the level I used to do of course. That level of climbing is just too hard on the joints.

I figured out a long time ago that I don't know how to do a hobby just a little bit. I gave up pistol shooting when I moved to Atlanta back in the 70's. I bought a 72" long bow and figured that would be inexpensive. You know reusable ammo and all that. Wrong. Within a year I had 3 bows, was making my own arrows, bow strings, releases, and bow sight, stabilizers and other things you "need" to shoot at the level I wanted. I spent more money on archery than I did on guns.

Re: Question for the day:

#19

Dick Hines

Re: Question for the day:

Dick Hines

Well at fair market priceing I would have enough money to buy a new motorcycle. With what was left over I would buy a couple new fly rods and and spend my last days rideing around and fly fishing.

I have more hobbies than I have money anyway.

Re: Question for the day:

#20

they already have tried

D. Hansen

Re: Question for the day:

#21

Re: Question for the day:

Carole Valentine

Might be tough to find someone to buy your woodshop and tools if woodworking were banned...unless you could convince them that all the tools are for metalworking or stoneworking or.... :D

Re: Question for the day:

#22

Clay, Glass, Stone - or learn the guitar

charlie belden

. . . or I could go back to lost wax casting jewelry and small sculpture.

. . . or break out the airbrushes, frisket, rubber cement, inks and paints and play with them.

. . . or get back into electro forming and plating jewelry and small sculpture.

. . . or work on some stories about experiences in the '60s that, in retrospect, where pretty "unusual".

( "little gathering - of 80,000 people - for three days and two nights for example)

There are plenty of alternatives to wood turning and flat work.

Re: Question for the day:

#23

Re: Question for the day:

Bill Grumbine (Kutztown PA)

Steve, you have to change your parameters. Much more realistic, and something to seriously think about, is the person who refuses to acknowledge the possibility of allergic reaction, or emphysema, or serious injury causing them to have to give it up. I already know of a man who bought top shelf everything after selling a yacht, and only a few short months later, having to give it up because of allergies. I believe he spends his time playing golf now.

Re: Question for the day:

#24

Re: Question for the day:

Bill Grumbine (Kutztown PA)

Polymer is the way to go, especially for those EBRs (that's evil black rifles for those of you who don't know) :b

Re: Question for the day:

#25

Mike Stafford

I had to give up golf....

Mike Stafford

My golf was so poor I spent too much time in the woods and since I am allergic to poison ivy I decided to take up woodworking. It was also tiresome to carry all the extra clubs: chain saw, bush axe, sling blade, pole saw.....

If I had to give up woodworking I would still have fishing which they are also trying to ban.

All that leaves is gardening and my paper hobbies....