Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Cherry "Post"

Posts

Cherry "Post"

#1

Cherry "Post"

Bob Edwards


This is from a Cherry "post" given to me by a friend. It was made by gluing up 1" X 5" boards. I've made several items from it. This is the latest. The HF is 4" W and 3.5" tall. Total height with finial is 6.5" The finial is maple died green with vegetable dye. It is difficult to see in the photo but so much dye was absorbed on end grain that it looks black but if you look closely the shaft which is side grain is green. My apologies for the photo but the grand kids are coming and I'm in a hurry!!

Re: Cherry "Post"

#2

Re: Cherry "Post"

fgvanatta

Nice looking piece. I especially like the finial.

Frank

Re: Cherry "Post"

#3

Re: Cherry "Post"

Tom Stevenson

My impression exactly. I love the finial. What is it about the finial that makes it work? You would think the top porton is too tall, but it is not. It works. Is it just the finial or is it the whole piece? I am just itching to make a finial that looks as good as that. So all you "Golden Mean" proponents, is that what is going on here?

Re: Cherry "Post"

#4

Leo Cuellar

Re: Cherry "Post"

Leo Cuellar

It is a nice piece, what brings it to life for me is the jaunty angle that you terminated the finial at. Gives it just the right amount of "attitude".

Re: Cherry "Post"

#5

Re: Cherry "Post"

Bob Edwards

Thanks for the comments.The finial is an unashamed rip off of a Keith Burns finial. I have always loved the simple elegance of this shape. This is a slight departure in that I have given the top just a little lift. It kind'a goes trumpet shaped at the top.

I hope Keith doesn't mind. I'm sure I am not the only turner that has been inspired by Keith's work.