Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Spalted Beech Wobbly Thing

Posts

Spalted Beech Wobbly Thing

#1

Spalted Beech Wobbly Thing

ronnyeelen


This piece is 15cm long, about 10cm wide. Smalll compared to the tree it came from. The tree came from a guy who cleares out plots of land. It was located next to a pond on someones land and it had to go, to make room for something else. The trunc of the tree had been standing upright in his back yard for 2 years. Until it was getting in the way there as well. As he supplies firewood and mulch for alternative fuels, the trunc was headed that way as well. However, his wife first wanted to try to find an artist who could maybe do something with it. She thought it was too nice to just burn up.

That's how it was announced at one of the meetings of the Flemmish woodturning guild. Were I heard it.

I am not an artist, but I did wanted to see the tree. So after contacting him I drove over and checked it out. Already lots of rott on the outsides but still a lot of very nice wood within. So I said, just bring it over to my place... and they did. Result 3600kg of spalted beech on my driveway, in 6 pieces of about 600kg each. The largest diameter I was still able to measure was 154cm (60 inches?). That is big over here. It took a LOT of work and sweat to get that cut up into blocks I could handle. Now it is all stacked up in the back of the garden. And this... is the first piece made of that wood. It was turned from a small block, the sides were not straight. After turning it was sanded off the late, hand held. Finish is lemon oil.

All comments are welcome.

Other views...



Re: Spalted Beech Wobbly Thing

#2

Steve Kubien

I love it.

Steve Kubien

I think this is a great piece with a cool story. That's plenty big (the tree) for me. You've got 3� tonnes of the stuff?!?!?!?! Awesome! Hope you don't have any plans for a month or two.

Re: Spalted Beech Wobbly Thing

#3

Re: Spalted Beech Wobbly Thing

GaryG in MD

That's nice work from a beautiful piece of "firewood"

Good get! I can't imagine what I'd do with 4 tons(!!!) of wood! That's a commitment! ...Gary

Re: Spalted Beech Wobbly Thing

#4

Re: Spalted Beech Wobbly Thing

Ronny Eelen

Steve, GaryG, I think it is going to take more than a couple of months for me to get trough that lot.

When I started turning and went to the first meeting of the guild I thought 'oh my god, they are all old...' (no offense intended). It looked to me at that point as if woodturning was a retired-person-occupation :-) I still have a daytime job, still for the next 20 years or so. That means that I will have to tackle the 3.5 tons in the evenings, and maybe over the weekends. Too ambitious?

Anyway, before I get kicked, a lot of younger people have joined our guild since then, so it is, and were already members. But overall... I also joined another woodturning club, also with monthly meetings, and also there with my 46 years I seem to be the youngest.