Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Opinions sought for work in progress...

Posts

Opinions sought for work in progress...

#1

Leo Cuellar

Opinions sought for work in progress...

Leo Cuellar


I was originally going to toss out this piece of wood due to shop space issues... glad I didn't. I guess there is such a thing as good crotch rot :D Very hard to come up with a shape that shows off all the features of this chunk of birch.

Anyway, I'm married to the idea of the hammered copper legs... the question is should they be... longer?... larger diameter?... splayed out farther? (The legs will be set into the piece.)

The piece is 7&1/2"d the legs are 1/2"d. I have 5/8" & 3/4" also.

Or does it not work at all?

Re: Opinions sought for work in progress...

#2

Dennis in Southern Oregon

Re: Opinions sought for work in progress...

Dennis in Southern Oregon

Leo, this is an interesting and attractive piece. Because of the low camera angle, it hard to tell what the shape of the top is, but it seems to be a shallow bowl. Is that correct?

Regarding the legs, my sense of balance and form says that they should be moved inward so that they do not sit on the transitional curve between bottom and side. The leg size seems good esthetically, but it could be made longer if that would better suit the intended function of the piece. Making them much shorter would undercut the impact of the hammered copper in my view.

Please how us the final result.

Dennis

Re: Opinions sought for work in progress...

#3

Leo Cuellar

Re: Opinions sought for work in progress...

Leo Cuellar

Yes Dennis, it is rather shallow, a more sweeping reverse of the rim. I wanted to keep it relatively flat to preserve the flame figure which is not evident in these pics. It is only sanded to 100# at this point until I decide what to do with the legs.

Yeah, I was considering what you suggested. Maybe an inch longer but the same angle? Just inside the lower curve?

Re: Opinions sought for work in progress...

#4

Re: Opinions sought for work in progress...

Jorge Casta�eda

Yes move them in further, splay them more and make them a tad longer, same diameter.

Re: Opinions sought for work in progress...

#5

Leo Cuellar

Re: Opinions sought for work in progress...

Leo Cuellar

Thanks Jorge. It sounds like I'll be spending some more quality time with my 4oz Plumb ball peen :D

Re: Opinions sought for work in progress...

#6

Leo Cuellar

With finish plus one...

Leo Cuellar

its back again with 10 coats of tung oil. I decided I had to try to make something with the scraps and I guess Molly's wonderful spoons from the other day inspired me. I had to try making one, it gave me a chance to finally use the Sorby steb center I got last month. (Much better than a regular spur) Decided I'd fire up the smoke wrench for this since it was my first one(hehe) :b

I recycled one of the first legs for the ferrule portion of the handle...