Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Help, no quill lock

Posts

Help, no quill lock

#1

Dennis in Southern Oregon

Help, no quill lock

Dennis in Southern Oregon

I recently bought a Powermatic 18" VS drill press. I later discovered to my surprise that it does not have a quill lock, which makes drum sanding, routing, planing, etc. very awkward. :( Does anyone know of an aftermarket attachment or a reasonable way of modifying the drill press to add a quill lock capability?

Dennis

Re: Help, no quill lock

#2

Re: Help, no quill lock

Nicholas Tuzzolino

Dennis: This is very strange for such a good drill press. I would contact Powermatic Tech Support at 1-800-274-6846. These guys seem to know what's going on and can possibly offer a solution.

Re: Help, no quill lock

#3

Dennis in Southern Oregon

Re: Help, no quill lock

Dennis in Southern Oregon

Thanks Nicholas. At your suggestion, I called Tech Service at Powermatic and got a "sorry, but there is nothing we can do".>( My current thought is to replace the quill sideplay adjustment stud with a longer stud and a handle, but I will have to figure out how retain its original function as well.

Dennis

Re: Help, no quill lock

#4

Re: Help, no quill lock

Doug Wolf

If I used this drill press to drum sand, I would lock the quill in the position shown in figure 10 on page 10 of the owners manual. Just run the bottom depth stop up to hold the quill where you want it and run the top depth stop down to lock the quill in position.

Re: Help, no quill lock

#5

Re: Help, no quill lock

Barry Irby

I don't have that DP and have never seen one or one with a quill lock that i know of.

What I do on my old Delta Rockwell is to run the quill down and insert a piece of wood into the space between The Depth stop and the body the DP. Just wedge whatever with I want in there to hold the quill down as far as I want. Works for me.

Re: Help, no quill lock

#6

Re: Help, no quill lock/Safety note

Don Evans

There is a quill lock on this drill press. It just isn't as handy as some.

As Wolf suggested, look at figure 10 on page 10 of the manual and note how they locked the quill down with the two nuts on the depth stop.

By moving the top nut up as far as you want the quill to go down and while holding the quill down with handles you then run the bottom nut up as far as it will go.

At that point the quill will stay in that position.

From a safety standpoint, I hope you will not use your drill press for routing and planing.

Both of those operations are not condusive to a drill press. Both operations will cause lateral pressure and vibration. The MT2 that holds the chuck in will fall out with vibration and with one of those planing things I'd hate to be standing in front of it when it falls out.

You really need a drawbar holding at MT in the quill for those type operations. Thats why milling machines use drawbars and collets instead.

Don

Re: Help, no quill lock

#7

Dennis in Southern Oregon

Re: Help, no quill lock/Safety note

Dennis in Southern Oregon

Thanks Don. I am aware of the depth stop on my drill press and that it can used in lieu of a quill lock for some applications. However, it is at best cumbersome to use. I agree that heavy duty routing on a drill press is not a good idea. I have a router table for that. However, I do not have an over arm router and I sometimes need to do some light duty routing where I can see and control the routing operation.

Dennis

Re: Help, no quill lock

#8

Re: Help, no quill lock

Roger

A piece of clear thick wall plastic tube the same outside dia. of the quill, the length of the distance you want between the power head and the chuck with a slit cut in the tube to allow you to fit it over the quill will work.