Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Too hot to be working...

Posts

Too hot to be working...

#1

Too hot to be working...

JamieDonaldson

...outside, so yesterday I made some shop time and turned another variation on the square theme. Maple body/walnut finial, 9"Hx6 1/2" sq.

Re: Too hot to be working...

#2

Re: Too hot to be working...

fgvanatta

Very nice. I especially like the finial.

Frank

Re: Too hot to be working...

#3

Re: Too hot to be working...

John Lucas

Mighty pretty Jamie. It's downright cool here at 92. I may have to dig out my parka.

Re: Too hot to be working...

#4

Dick Hines

Re: Too hot to be working...

Dick Hines

Looks like time well spent. You must have AC in your shop.

I don't now but will have by next summer.

Re: Too hot to be working...

#5

Mike Stafford

Just plain hot, Jamie!!!

Mike Stafford

That square based hollow form is just plain hot!!!

Re: Too hot to be working...

#6

Re: Too hot to be working...

Mike Foster

Nice Jamie. Definitely a different take on square. It's hot here, stifling in the shop with no air movement, but I have an industrial fan that I turn on my back and all is well. Added bonus is all the dust is blown away from me while sanding.

Mike

Re: Too hot to be working...

#7

Re: Too hot to be working...

Janet Bequeaith

I really like the transition to the finial--a beauty!!

Re: Too hot to be working...

#8

very nice!

GaryG in MD

Re: Too hot to be working...

#9

Re: Too hot to be working...

Terry Scott

A better Finial I have not seen love the crispness I am very envious

Re: Too hot to be working...

#10

Re:Finials are easy Terry, but....

JamieDonaldson

...you're accustomed to tackling the big challenges!

Re: Too hot to be working...

#11

Very cool. (NM)

Toney Robertson

Re: Too hot to be working...

#12

OK, Take that square part off....

Barry Irby

and turn it over so that the vessel rests on four feet. ;) Or is that the part that has been done already?

Great looking vessel.

Re: Too hot to be working...

#13

Re: Barry, do you mean like this?

JamieDonaldson


Re: Too hot to be working...

#14

Too much heat melted the wings 

John Lucas

Re: Too hot to be working...

#15

For ME?

Barry Irby

I can't believe you did that for me. Nice job. Looks great, but you can't set stuff on the wings like you can on the other one.

Knew that couldn't be my idea.