Yew said it and current projects (long)
Mike Foster
After seeing what John and Terry have been up to, I decided to take a couple of shots of what I've been playing around with.
These pieces I roughed out of the Yew that was identified by others here. I had to give it a go, just to see what it would do. The bowl is turned to about 3/64" and the hollowform is about 3/16". I was really just having fun, and wanted to see what I could expect with movement and cracking from the wood. I did not coat either one with anything and they have both been just sitting in the shop. They were turned 3 days ago, and seem to be holding up well. Not even much distortion yet. Both are just straight off the gouge, no sanding. I am not sure if they will get more treatment. Might pierce the bowl, and perhaps burn the vessel. This yew was soaking wet and a real pleasure to turn. Too bad I can't get anything much bigger out of the logs I got my hands on.
Terry posted pics of some very nice mirrors he turned inspired by John's work. Well I took it a step further and tried to reproduce one of his laminated glue ups. I had a couple of mirrors that I have had for years and decided to give a go using John's techniques. I had a 3/4" bandsaw blade that was cutting really smooth, but it couldn't make the radius of the curves, so I put on a 1/4" blade and tried to make it work. If you look close at the mirror, you can see some wobbles in the veneer which was caused by wobbles in bandsawing. I didn't want to take the time to do pattern routing, or hand fitting after cleaning up the curve with a drum sander, so I just glued it up. Chalk it up to a learning curve. These are also the first items I've actually shot with lacquer, other than deft. So that is a real learning curve for me as well. I found out that I definitely do not want to spray in the shop. I was going to try to jerry rig a spray booth, but I don't think anything I make will contain the overspray. I'll have to content myself with other finishes come winter.

The last shot shows a "bench shot" of various projects that are in various stages of completion. I have been trying to get some practical items completed for the one craft show that I do every year. It is a high end show, and I can at least cover costs with the smaller ticket items if the economy does what it did to the show last year. So I'm turning some basic salad bowls, some of Ruth's coffee scoops (they are fun to turn and seem to sell well), John's mirrors, bottle stoppers..... I also have a couple of vessels started. The vessel in front is a blatant John Jordan copy. I have always loved his forms and saw him demo at the symposium, and since someone else had the audacity to get him at the WC exchange, I decided I had to do one. It is close to being sanded, then I'll probably texture it somehow. The other vessel is just roughed out and it is destined to become a carved vessel ala Michael Kehs. I sat in on his demo as well and decided I needed to give his techniques a go. Much of what is on the table I would credit others with the originality. I am really doing these just to learn the skills and see where I will take them in my work. So thanks to all those who have given me inspiration, John Lucas, John Jordan, Michael Kehs, Ruth Niles....
This is all being done when I get time (I have a day job) and between reconfiguring my shop to fit around the American Beauty. I love that lathe. I had my woodfast against a wall, but decided that this lathe needed to be the center of attention. I had to do a lot of shifting of stuff to make the shop more ergonomic. Once I get it fairly settled, I'll post a pic of the setup. I was turned a coffee scoop last night and started another today and realized how much of a creature of habit I am. I was hollowing the scoop out over the bed like I have done for years. A light came on tonight making a scoop and I realized that I don't have to do that any more. Move the headstock down and hollowed off the end. It seems like a little thing, but what a difference. Duh!
Mike




