Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

BLAST IT - with what?

Posts

BLAST IT - with what?

#1

BLAST IT - with what?

charlie belden

As if I need ANOTHER area to explore - I picked up this small sandblasting "cabinet" - with a roll around cart base - for $25. The gun is a bit large for the inside space and with two hoses - one for medium and one for air - it's awkward as hell to use in the tight available working space.

Came with some of what was probably beach sand - of a range of grits. - and a ceramic nozzle with a 3/16" hole. Picked up a 100 lb. bad of "fine" sifted Montery Beach Sand to play with. Works, but cuts REALLY slowly - even on doug fir.

So now I'm looking for a smaller "gun", more aggressive medium, a source or two for guns and mediums and some info on using a sandblaster on wood - preferably turned wood. Any help would be greatly appreciated.


Lots of possibilities with this "surface enhancement" tool - buyt probably also another Learning Curve to climb.

Re: BLAST IT - with what?

#2

Barb Siddiqui

Ah, the curious mind.

Barb Siddiqui

Re: BLAST IT - with what?

#3

Joe Fleming

Re: BLAST IT - with what?

Joe Fleming

Charlie, If it is like all the new toys I collect, it will become a pretty pink stacking box. At least it is flat on top, so you can put something on top of it. :-) Joe

Re: BLAST IT - with what?

#4

Re: BLAST IT - with what?

Jorge Casta�eda

Carborundum is one I have used to clean metal, also a coarse black stuff I don't remember the name of, it was the thing to clean up a badly stained granite fireplace. I found both at a huge industrial provider, they had many options, including walnut and coconut shells, they also had a selection of nozzles.

It helps to have a compressor with a large storage tank.

Re: BLAST IT - with what?

#5

Re: BLAST IT - with what?

Dick Coers

No experts chiming in, so maybe I'll tell you what I have found by playing. For dark woods, Menards sells a fine slag called something like Black Beauty. Works pretty well, but will give you black specks in white woods. Might be something you like though, and it's cheap. Aluminum oxide will probably be the general material of choice, and Harbor Freight sells some course stuff. The books will tell you to stay away from any natural sand. Some lung problems from silicosis, inhaling silica dust. Pretty bad stuff with prolonged exposure. Of course, pressure feeds are the best blasters, siphon are a distant second. Someday I'll get a photo setup going to show my work.

What I love about blasting is the feel and the visual from the growth rings. You really magnify the variations in growth ring sizes and the undulations and irregularities. Sometimes you get something like driftwood, buy it always looks super aged. Crappie siberian elm becomes a treasure when blasted!

Re: BLAST IT - with what?

#6

Re: BLAST IT - with what?

charlie belden

I've got a 30 gallon oil motor compressor with about 5.5 cfm so the compressor will do. It's the unweildy gun that's one of the shortcomings. I'd like to get a smaller gun - preferably a barrel / pen type that'll take different tips. Thinking about it - perhaps a jewelry supply outfit would have medium. I know they sell different grits for tumbling rocks - but that stuff is EXPENSIVE - and I probably need at least 15 pounds of the stuff to keep the gun supplied with grit.

Sandblasing seems to be another way to "pop the grain" - in this case literally - creating a real 3D contrast between hard and soft grain.

Have an almost inexhaustible supply of driftwood available here in Northern California. A bit of pressure washing to get the sand off/out of it and your off and running on the lathe. Sand blast after turning to get it back to driftwood looking.

Re: BLAST IT - with what?

#7

Re: BLAST IT - with what? *LINK*

Dick Coers

Sandcarving is the place to research on Google. These are the guys that make multilevel "blasting" in glass. The top gun (pun intended) with them is the PAB gun. Seems to get raves on the sandcarving sites.


PAB gun

Re: BLAST IT - with what?

#8

Re: BLAST IT - with what?

Cyril Griesbach

Charlie,

I've had the best luck with glass beads from Harbor Freight. I've also used walnut shells, garnet and silica sand but the glass beads work the best.

Re: BLAST IT - with what?

#9

Re: BLAST IT - with what?

Dick Coers

What species are you using the glass beads on? The one time I tried glass beads, I found them to work really slowly. Maybe it was the air pressure, what psi do you use? How deep were you cutting? Maybe that's it, I'm trying to go to deep.

Re: BLAST IT - with what?

#10

Now I'm So Confused

charlie belden

Silica is bad for your lungs.

Beach sand has silica in the mix.

Glass is made from melted sand (ok - so other things get added to it).

Fine ground up glass is used as a sandblasting medium - but is dangerous to use without a good respirator - since it's silica and sharp.

Glass beads, on the other hand, seem to be a medium of choice, beads implying Not Sharp little pieces - of glass.

Now I'm confused.